Product supplierLight Gray Upholstered Cantilever Conference Chair, Smooth light gray polyurethane (PU) faux leather
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 680 × 1020 mm | |
|---|---|---|
| Seat height | 450 mm | |
| Seat width | 510 mm | |
| Seat depth | 480 mm | |
| Backrest total height | 640 mm | |
| Seat cushion thickness | 80 mm | |
| Armrest height above seat | 200 mm | |
| Sled base footprint width | 580 mm | |
| Sled base depth (front to rear floor contact) | 620 mm | |
| Backrest lumbar zone height | 180 mm above seat | |
| Finished Seat Cushion Thickness | 90mm | |
| Backrest Padding Thickness | 70mm | |
| Lumbar Support Zone Height | 240mm | |
| Clear Width Between Armrests | 540mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Estimated net weight | 17kg | |
|---|---|---|
| Static seat load capacity | 136 kg / 300 lbs | |
| Recommended user weight limit | 120 kg | |
| Cantilever frame static load test reference | ≥15000 cycles without structural deformation | |
| Applicable user count | Single occupant | |
| Estimated net product weight | 17.5 kg | |
| Recommended maximum occupant weight | 120 kg | |
| Cantilever frame durability reference | ≥20000 dynamic flex cycles without permanent deformation | |
| Upholstery seam strength | ≥200 N per seam | |
| Seat Foam Density / Rebound Reference | 45kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | Smooth light gray polyurethane (PU) faux leather | |
|---|---|---|
| Seat cushion core | 45kg/m³ high-density polyurethane foam | |
| Backrest cushion core | 35kg/m³ medium-density polyurethane foam | |
| Cantilever support frame | 22mm diameter chrome-plated steel tube, wall thickness 1.5mm | |
| Armrest structure | Steel inner frame wrapped in matching light gray PU upholstery over foam padding | |
| Floor contact glides | Injection molded non-marking nylon glides | |
| Internal back support panel | 12mm thick molded plywood | |
| Upholstery seam stitch pitch | 3 stitches per cm / 8 stitches per inch | |
| Armrest assembly | 12mm diameter curved steel inner support, wrapped in 20mm PU foam and matching light gray PU upholstery | |
| Internal back support substrate | 12mm thick molded beech plywood, shaped to match ergonomic back contour | |
| Internal seat support substrate | 15mm thick multi-layer plywood, bonded to seat foam core | |
| Upholstery construction | Double-stitched seam with bonded nylon thread, 3 stitches per cm (8 stitches per inch) pitch |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating support | Fixed cantilever sled design, no swivel, height adjustment or tilt, provides gentle flex for dynamic seated comfort | |
|---|---|---|
| Fixed arm support | Integrated curved upholstered armrests fixed permanently at 210mm above seat surface, aligned to standard 750mm desk height to support neutral forearm posture during meetings | |
| Ergonomic back support | Contoured two-section backrest with horizontal seam defining a built-in lumbar curve at 220mm above seat, supporting upright seated posture during 2 hour meeting sessions | |
| Floor protection | Non-marking glides on all base feet allow smooth repositioning on hard floors without scratching | |
| Cantilever flex | Chrome steel frame provides ~10 degrees of controlled backward flex under seated load without mechanical tilting mechanism | |
| Use case flexibility | Fixed design requires no user adjustment, ready for immediate use in meeting or guest seating | |
| Seating support behavior | Fixed cantilever sled base design, no swivel, height adjustment, casters or tilt mechanism; steel frame provides 12 degrees of controlled backward flex under seated load to reduce static sitting pressure without mechanical adjustment | |
| Floor protection and repositioning | Non-marking rubber-padded nylon glides on all four base contact points allow quiet repositioning on wood, tile, and vinyl hard floors without scratching or leaving marks; glides produce minimal noise when chairs are shifted under tables | |
| Anti-tip stability | 610mm front-to-back sled floor contact span prevents tipping during normal rearward leaning, eliminating need for rear anti-tip protrusions that catch on carpet or flooring gaps | |
| No-assembly use preparation | Chairs are shipped nearly fully assembled, only requiring minor glide fitting or bolt tightening before deployment for immediate guest/meeting use | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Number of packages | 1 unit per carton | |
|---|---|---|
| Reference carton dimensions | 700 x 450 x 650 mm | |
| Reference gross weight per carton | 21kg | |
| Reference CBM per unit | 0.205 cbm | |
| Indicative 40HQ container load quantity | 350 units | |
| Assembly time reference | 10minutes per unit | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40minutes per set | |
| Reference Packaged Gross Weight | 23kg/set | |
| Reference Carton Volume | 0.26m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference/meeting room seating | Ideal for boardroom and meeting table arrangements, fixed non-rolling base prevents unwanted movement during discussions | |
|---|---|---|
| Executive office guest seating | Suitable for placement in front of executive desks for visitor seating, polished chrome and light gray finish matches premium office decor | |
| Reception/waiting area seating | Durable cantilever construction supports high-traffic waiting area use with minimal maintenance requirements | |
| Training room seating | Low-profile fixed design allows easy tucking under tables when not in use to maximize floor space in training facilities | |
| Recommended floor type | Suitable for hard floors (wood, tile, vinyl) with fitted non-marking glides; not recommended for thick pile carpet without alternative glides | |
| Standard available upholstery colors | Offered in light gray (as pictured), plus standard black, dark gray and beige options for commercial projects | |
| Conference/boardroom seating | Suitable for 12 person conference table arrangements, fixed non-rolling base prevents unwanted movement during discussions, low-profile sled base tucks fully under 750mm high conference tables to save space | |
| Corporate reception/waiting areas | Appropriate for high-traffic reception zones, durable PU upholstery resists stains and allows easy wiping cleaning, robust cantilever frame withstands daily high-turnover use with minimal maintenance |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 | Applicable reference standard for office chair safety, strength and stability for non-adjustable office seating | |
|---|---|---|
| EN 1022:2018 | Applicable reference standard for seating stability testing for cantilever domestic and contract chairs | |
| EN 14465:2003 | Applicable reference for upholstery fabric/leather abrasion resistance, recommended minimum 50000 Martindale cycles for commercial use | |
| Tip stability threshold (rearward) | ≥60 kg applied 100mm from back top without tipping |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 (non-adjustable chair clauses) | Applicable reference standard for commercial office chair static and dynamic load testing for fixed guest/conference chairs |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3326-2016 | Applicable standards and test results require confirmation | |
|---|---|---|
| GB/T 22792.1-2009 | Applicable reference standard for office chair structural strength testing for fixed-base seating | |
| GB 18587-2001 | Applicable reference for limit of harmful substances in upholstered furniture textiles/leather |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3326-2016: Applicable standards and test results require confirmation; 2. GB/T 22792.1-2009: Applicable reference standard for office chair structural strength testing for fixed-base seating; 3. GB 18587-2001: Applicable reference for limit of harmful substances in upholstered furniture textiles/leather; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool