纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 680 × 1220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Static base load rating	700 kg
Caster rolling durability	100000 cycles
Seat slide capacity	0 mm fixed seat depth
Recommended user height range	1900 mm
Warranty	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan full-grain leather or matched leather-look surface over molded cushion
Backrest upholstery	Tan upholstered padded panel with a horizontal lumbar seam and stitched perimeter
Seat cushion	High-resilience polyurethane foam at 90 mm thickness under upholstery
Back cushioning	Layered polyurethane padding at 100 mm thickness over a shaped load-bearing board
Internal seat shell	12 mm molded plywood or reinforced composite seat carrier
Armrest pads	Tan upholstered padded rails continuous with the seat and back side panels
Arm supports	Polished die-cast aluminum open-loop brackets with bright finish
Gas lift	Chrome-plated steel telescopic cylinder, Class 4 grade with 80 mm lift stroke
Tilt mechanism	Black powder-coated steel multi-position tilt mechanism under the seat
Five-star base	Polished die-cast aluminum five-star base with 2.5 mm nominal wall section
Casters	Black nylon twin-wheel casters with 60 mm wheels and metal mounting stems
Fasteners and pivot hardware	Zinc-plated steel bolts, pivot shafts, and lock washers at arm and mechanism joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotational seat around the central gas-lift axis
Pneumatic seat-height adjustment	Class 4 gas lift provides an 80 mm height adjustment stroke through the under-seat lever
Recline tilt movement	Synchronized seat-and-back tilt with 18-degree rearward recline travel
Tilt lock positions	4-position lock including upright, two intermediate reclines, and free-tilt mode
Tilt tension control	Rear knob adjusts recline resistance for users up to 150 kg
Fixed arm support	Integrated loop arms provide fixed 230 mm forearm support without height or width adjustment
Mobility	Five 60 mm twin-wheel casters enable rolling movement on carpet, wood, and tile floors
Back posture zones	Horizontal seam divides upper shoulder support from lumbar support zone
No headrest adjustment	High upholstered back supplies head and upper-shoulder contact without a separate adjustable headrest
No adjustable lumbar accessory	Contoured lumbar support is built into the backrest rather than an adjustable pump or strap
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a 2000 mm executive desk where the tan high-back design provides managerial presence
Managerial workstation	Recommended for daily 8 hour computer and meeting tasks with swivel and recline support
Meeting or boardroom setting	Usable as a premium visitor or conference chair around formal board tables with 750 mm height
Private consultation room	Suitable for consulting, finance, or legal meetings where padded arms and high-back support are needed
Hotel business center	Appropriate for business lounges requiring mobile seating and a coordinated tan leather appearance
Recommended floor surfaces	Suitable for low-pile carpet, hardwood, laminate, and tile when fitted with the specified 60 mm twin-wheel casters
Color planning	Use one tan finish with polished aluminum to coordinate with walnut, oak, black, or neutral office furniture
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Applicable standards and test results require confirmation
EN 1335-2 applicability	Use for safety, structural strength, stability, and mechanism inspection
EN 1335-3 applicability	Use for static load, fatigue, impact, and caster durability test methods

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 applicability	Use for office chair safety, strength, stability, durability, and mechanism endurance acceptance
Back strength test target	Specify acceptance under ANSI/BIFMA X5.1 back-rest static and fatigue load procedures
Base and caster test target	Specify five-star base, caster, and chair drop tests under ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Use for seat and back strength and durability tests during commercial furniture acceptance
GB/T 3324 applicability	General wooden furniture quality and inspection requirements may apply to upholstered internal panels
GB 18584 applicability	Use for indoor furniture limited-substance acceptance of wood-based panels and finishes

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Use for seat and back strength and durability tests during commercial furniture acceptance；
2. GB/T 3324 applicability：General wooden furniture quality and inspection requirements may apply to upholstered internal panels；
3. GB 18584 applicability：Use for indoor furniture limited-substance acceptance of wood-based panels and finishes；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-TAN-ALU5

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-TAN-ALU5

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-TAN-ALU5打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Tan Leather Executive Swivel Chair, model EXEC-HB-TAN-ALU5, presents a formal managerial silhouette with a tall tan upholstered back, generously padded seat, and continuous armrest rails that flow visually with the seat and back side panels. A horizontal lumbar seam and stitched perimeter give the backrest a structured appearance, while the polished aluminum open-loop arm supports and five-star base provide a bright contrast with the tan upholstery and black steel tilt mechanism. Its overall dimensions are 680 by 680 by 1220 millimeters, with 540 millimeters of clear width between the armrests and a 240-millimeter lumbar support zone. The chair is offered as an unbranded executive office seating product. Construction combines tan full-grain leather or a matched leather-look surface with molded cushioning and durable support components. The 90-millimeter seat cushion uses high-resilience polyurethane foam rated at 45 kilograms per cubic meter, while the back uses layered polyurethane padding over a shaped load-bearing board. Backrest padding is 70 millimeters thick, foam rebound is rated at 40 percent, and the internal seat carrier is 12-millimeter molded plywood or reinforced composite. Polished die-cast aluminum forms the arm brackets and five-star base, a chrome-plated Class 4 steel gas lift provides height movement, and black powder-coated steel forms the multi-position tilt mechanism. Black 60-millimeter twin-wheel nylon casters complete the base. Function is centered on executive-task flexibility. The seat rotates a full 360 degrees around the central gas-lift axis, and the under-seat lever controls an 80-millimeter pneumatic height adjustment. The synchronized seat-and-back tilt offers 18 degrees of rearward recline, with four lock choices: upright, two intermediate recline positions, and free-tilt mode. A rear knob adjusts recline resistance for users up to the recommended 150-kilogram capacity. The fixed loop arms offer 230 millimeters of forearm support but do not adjust in height or width. Mobility is supported by five twin-wheel casters intended for low-pile carpet, hardwood, laminate, tile, wood, and related office floors. The chair is suited to executive offices behind a 2000-millimeter desk, daily managerial workstations used for computer and meeting tasks, boardrooms with 750-millimeter-high formal tables, private consultation settings, and hotel business centers. Buyers should note the 18-kilogram net weight, 150-kilogram user capacity, 700-kilogram static base load rating, and 100,000-cycle caster durability rating. Each set ships in two cartons with a packaged gross weight of 23 kilograms, carton dimensions of 850 by 420 by 720 millimeters, 0.26 cubic meter total volume, and a reference assembly time of 40 minutes. The indicative 20GP loading quantity is 135 sets at 85 percent space utilization.

High-Back Tan Leather Executive Swivel Chair Specifications

供应商与现货