纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 680 × 1100 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight capacity	150 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Fabric or leather abrasion target	50,000 Martindale cycles
Gas lift cycle target	100,000 height-adjustment cycles
Caster rolling durability	100,000 rolling cycles
Recommended daily occupancy	8 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Tan leather or leather-look surface with twin-panel center stitching
Seat cushion	Molded polyurethane foam, 100 mm thick target
Back cushioning	Polyurethane foam, 90 mm thick target
Internal seat shell	12 mm molded plywood or engineered composite board target
Back support frame	18 mm steel or bent plywood support target
Arm pads	Tan upholstered padded pads over formed inner support
Arm support brackets	Black powder-coated steel brackets with polished inner arm structure
Gas lift	Chrome-plated steel telescopic gas cylinder
Five-star base	Polished chrome-plated steel five-star base
Casters	Black nylon twin-wheel casters with steel mounting stems
Mechanism	Steel tilt mechanism with black operating lever
Stitching	Center vertical seam with matching tan thread, 8 stitches per 50 mm target

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic gas lift with 80 mm vertical travel controlled by the visible right-side lever
Swivel function	360-degree swivel around the central gas-lift axis
Tilt movement	Synchronized back recline with 12-degree rearward tilt target
Tilt lock	Lockable upright position with release through the under-seat lever
Tilt tension control	Manual tension knob for user-weight resistance, 0 to 8 adjustment turns target
Mobility	Five independently rotating twin-wheel casters on a 700 mm base
Arm support	Fixed padded arms with 220 mm seat-to-arm height and no width adjustment
Back support	Continuous mid-back support with central seam and 650 mm back height
Occupancy orientation	Single-user front-facing task chair with centered seat and symmetrical arms
Floor protection	60 mm twin nylon wheels intended to spread load and reduce floor marking
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a 1600 to 2000 mm executive desk where tan upholstery and chrome provide a formal appearance.
Private manager workstation	Appropriate for daily computer and desk work with an 8-hour single-shift occupancy target.
Conference or meeting room	Usable at high-use conference positions requiring mobility, swivel access and padded arm support.
Home office	Fits a dedicated home office with a desk height of 720 to 760 mm and hard-floor surface.
Reception or advisory setting	Suitable for consultation rooms where a polished guest or manager chair is required.
Commercial procurement option	Can be specified with leather, bonded leather or polyurethane-leather upholstery after BOM confirmation.
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use office-chair dimensional safety and ergonomic layout requirements during design verification.
EN 1335-2 acceptance target	Apply office-chair safety requirements for stability, strength and structural failure prevention.
EN 1335-3 test reference	Reference office-chair test methods for structural verification and supplier inspection.
EN 1021-1 upholstery target	Use cigarette-ignition smouldering test criteria where indoor fire performance is specified.

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 caster and base checks	Require base, caster and leg-strength verification under the relevant X5.1 test procedures.
ANSI/BIFMA X5.4 alternative scope	Use lounge/executive seating criteria only if the final product is classified as non-task lounge seating.

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 furniture test applicability	Use seat and back strength/durability test principles for acceptance of the loaded chair structure.
GB/T 28005 drafting target	Use office-chair terminology and structural requirements when preparing the procurement drawing.
GB 18584 interior furniture limit	Specify indoor-furniture harmful-substance limits for finished upholstered seating materials.

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 furniture test applicability：Use seat and back strength/durability test principles for acceptance of the loaded chair structure.；
2. GB/T 28005 drafting target：Use office-chair terminology and structural requirements when preparing the procurement drawing.；
3. GB 18584 interior furniture limit：Specify indoor-furniture harmful-substance limits for finished upholstered seating materials.；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EC-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EC-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EC-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Leather Executive Swivel Office Chair, model EC-TAN-01, presents a formal executive profile through tan upholstery, a mid-back silhouette, twin-panel center stitching, fixed padded arms, and a polished chrome five-star base. Its overall dimensions are 660 by 680 by 1100 millimeters, with a 540-millimeter clear width between the armrests. The chair uses a central swivel layout supported by five independently rotating twin-wheel nylon casters on a 700-millimeter base, giving the piece a balanced, mobile footprint suited to desk-based work. Construction combines padded comfort with a structured support system. The seat and back use tan leather-look upholstery over polyurethane foam: the seat target is molded foam at 45 kilograms per cubic meter, while the back uses 35 kilograms per cubic meter foam. Finished cushion thickness is 90 millimeters at the seat and 70 millimeters at the back, with a 240-millimeter lumbar support zone. Internal support includes a 12-millimeter molded plywood or engineered composite seat shell target and an 18-millimeter steel or bent plywood back support target. The arm pads are upholstered and padded over formed inner supports, mounted on black powder-coated steel brackets with a polished inner arm structure. A chrome-plated telescopic steel gas cylinder connects the seat to the chrome-plated steel five-star base. The chair weighs 18 kilograms and carries a recommended user weight capacity of 150 kilograms. Functional features support routine office adjustment and movement. A visible right-side lever controls pneumatic seat-height adjustment across 80 millimeters of vertical travel. The seat rotates 360 degrees around the central gas-lift axis, while the synchronized mechanism provides a 12-degree rearward tilt target. Users can lock the chair in an upright position through the under-seat lever and refine resistance with a manual tension knob offering up to 8 adjustment turns. The fixed arms provide a 220-millimeter seat-to-arm height but do not adjust in width. Target durability references include a 50,000 Martindale-cycle abrasion rating and 100,000 gas-lift height-adjustment cycles.

Tan Leather Executive Swivel Office Chair Specifications

供应商与现货