The YUXIANG Fixed Cantilever Sled Base Mesh Back Conference Visitor Chair, model CNF-SLD-MSH-01, is a purpose-built office conference seating solution designed for consistent, long-term use across professional settings. Visually, the chair features a streamlined, cohesive light grey finish across its back support frame, integrated fixed armrests, and cantilever sled base, paired with a horizontally ribbed mesh back and fabric-upholstered seat for a clean, professional aesthetic that aligns with contemporary commercial and institutional interiors. The cantilever sled base creates an open, uncluttered silhouette, while non-marking nylon glides sit flush at the base points to protect flooring surfaces. Construction balances durability and user comfort across all components. The backrest uses a glass-fiber reinforced polypropylene frame upholstered in breathable horizontally ribbed polyester mesh, with an integrated molded lumbar support positioned to cradle the lower back. The seat is built on a molded plywood inner support board, topped with high-density cold-cured polyurethane foam padding and upholstered in wear-resistant polyester fabric. The cantilever base is formed from bent tubular steel with a powder coated light grey finish, welded to resist deformation under repeated use, and paired with fixed, integrated glass-fiber reinforced polypropylene armrests set at standard desk arm height. The 9 kg chair supports a recommended static user load of 120 kg, with abrasion-resistant mesh tested to 50000 cycles, mesh breathability of 350 mm/s, seat foam core density of 45 kg/m³ and a 45% rebound rate, and consistent seam stitching of 8 stitches per inch for extended wear life. Functionally, the chair offers fixed static seating with subtle controlled flex from the cantilever frame, a full mesh back that enables continuous air circulation to keep users cool during extended meetings, and a stationary non-rolling design that stays positioned securely without unwanted movement. The sled base is stackable-compatible to support flexible space reconfiguration. This model is suited for a wide range of spaces: corporate meeting rooms paired with standard 750mm height conference tables, visitor reception and waiting areas, training rooms requiring flexible multi-purpose layouts, open office touchdown zones for short-term collaborative work, government and education public meeting and hearing rooms, and standard 760mm height desk workstations for permanent dedicated seating. Procurement teams should note the chair requires partial user assembly with included hardware and instructions, with a reference assembly time of 40 minutes per unit. Each unit ships across two cartons, with a packaged gross weight of 23 kg per set, supporting efficient bulk shipping with up to 135 sets fitting in a 20GP container at 85% space utilization.