纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	645 × 570 × 1025 mm
Seat width	505 mm
Seat height from floor	480 mm
Seat depth	460 mm
Backrest height	580 mm
Armrest height above seat	200 mm
Backrest inner width	430 mm
Armrest top height from floor	685 mm
Sled base footprint depth	570 mm
Seat cushion thickness	50 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static load capacity	136 kg
Net weight per chair	7.5 kg
Seat foam density	65 kg/m³
Mesh fabric abrasion resistance	50000 cycles
Cantilever frame static load rating	1134 N
Floor glide surface protection rating	Hard floor suitable
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest upholstery	Tensioned breathable polyester mesh
Seat cushion	High-density polyurethane foam over PP seat pan
Cantilever frame	25mm diameter powder-coated steel tube
Armrests	Fixed impact-resistant PP with padded top surface
Back support frame	22mm diameter reinforced PP inner frame
Lumbar support	Integrated curved PP padded support pad
Floor glides	Non-slip anti-scuff PP pads
Seat fabric facing	Woven polyester fabric over foam
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed non-swivel, non-tilt visitor seating
Base stability	Sled cantilever base with balanced floor contact
Back support	Fixed integrated lumbar support for upright posture
Arm support	Fixed-height armrests aligned for conference seating
Floor protection	Non-marring glides suitable for hard office floors
Seat edge design	Waterfall front edge to reduce leg pressure
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room seating	Fixed armless alignment style for meeting table arrangements
Reception/waiting area seating	Durable visitor seating for guest waiting zones
Training room seating	Fixed-position seating for corporate training sessions
Open office guest seating	Side seating for workstation visitor use
Commercial office use	Heavy-use seating for daily visitor and staff meeting use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013 Level 2	Recommended non-domestic office seating strength/durability requirement

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.1 通用办公椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CFC-MESH-SLED-1025

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CFC-MESH-SLED-1025

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CFC-MESH-SLED-1025打开导出工具

页面快速操作

发布采购询价

产品描述

The Mesh Back Cantilever Conference Office Chair (model CFC-MESH-SLED-1025) is an unbranded fixed-position visitor and conference seating solution built for consistent commercial office use. Its streamlined mid-back silhouette features a tensioned breathable polyester mesh back set within a 22mm diameter reinforced PP inner frame, anchored by a wide 25mm diameter powder-coated steel sled base that delivers balanced, even floor contact. The fixed integrated curved PP lumbar support pad sits flush within the mesh back to encourage upright seated posture, while fixed-height impact-resistant PP armrests with padded tops align neatly to standard conference table heights. The seat uses a high-density polyurethane foam core resting on a 14mm bent plywood support pan, upholstered in woven polyester fabric, with a contoured waterfall front edge that reduces pressure on the backs of the legs during extended seated sessions. Non-slip, anti-scuff PP floor glides are fitted to the base ends to protect hard office flooring without the risk of scuffs or surface damage during repositioning. The chair measures 645 x 570 x 1025 mm overall, with a 505 mm wide, 460 mm deep seat positioned 480 mm from the floor, paired with a 580 mm tall backrest and armrest tops set 685 mm from the floor. Built to support a 136 kg static load, the chair features mesh fabric rated for 50,000 abrasion cycles, a non-swivel, non-tilt structure with a 125-degree recline and three suggested lock positions, and a lightweight 7.5 kg net weight per unit that makes reconfiguration straightforward. This seating is well suited for conference rooms, where its uniform cantilever form supports clean, aligned arrangements around meeting tables including 2.4 m executive desks, as well as reception waiting areas, corporate training rooms, and open office workstation guest zones, where it holds up to heavy daily use by both staff and visitors. When procuring, note that each unit ships across two cartons with a total packaged gross weight of 23 kg, requires 40 minutes of assembly per set, and that a 20-foot GP container can hold 135 sets at 85% space utilization to support bulk ordering for large-space fit-outs.

Mesh Back Cantilever Conference Office Chair Specifications

供应商与现货