纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 570 × 1000 mm
Seat height from floor	450 mm
Seat usable width	500 mm
Seat usable depth	450 mm
Seat cushion thickness	60 mm
Backrest height from seat	550 mm
Backrest width	420 mm
Armrest height above seat	190 mm
Armrest height from floor	640 mm
Sled base front-to-back length	570 mm
Armrest outer span width	650 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static user load	120 kg
Seat foam density	50 kg/m³
Seat foam rebound rate	45%
Back mesh abrasion resistance	50000 cycles
Cantilever frame static load capacity	500 kg
Chair net weight	12 kg
Floor glide static friction coefficient	0.6
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Cantilever base frame	2.0mm wall thickness chrome-plated steel tube
Backrest support frame	White molded polypropylene with 20% glass fiber reinforcement
Backrest panel	High-tensile breathable nylon mesh fabric
Seat cushion core	High-density cold-cured polyurethane foam
Seat upholstery	Olive green woven polyester fabric with white edge trim
Armrest supports	White molded polypropylene matching back frame color
Armrest contact pads	Smooth matte polypropylene contact surface
Floor contact glides	Injection-molded nylon anti-scratch glides
Seat underside shell	White molded polypropylene support pan
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating position	Fixed non-adjustable upright posture
Cantilever flex	Controlled 8° dynamic flex from sled frame
Back support	Contoured mesh panel with built-in lumbar curvature
Arm support	Fixed height T-shaped armrests aligned to standard desk height
Floor protection	Smooth nylon glides that slide without scratching hard floors
Stacking capability	Non-stacking fixed frame design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Meeting room use	Suitable for conference tables with 760 mm standard work height
Visitor reception use	Suitable for office reception and guest waiting areas
Training room use	Suitable for corporate training and classroom seating rows
Hard floor compatibility	Suitable for tile, wood, and laminate office flooring
Short-to-medium duration seating	Optimized for 4 hour seated sessions in collaborative settings
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Applies to dimensional safety and ergonomic requirements for office visitor seating
EN 1335-2:2018	Applies to structural strength and stability performance requirements for office seating

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017	Applies to static, impact, and cyclic load testing for commercial office seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3326-2016	Applies to dimensional tolerances and stability requirements for office seating
GB/T 10357.3-2013	Applies to mechanical strength and durability testing for office chair seats and backs

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3326-2016：Applies to dimensional tolerances and stability requirements for office seating；
2. GB/T 10357.3-2013：Applies to mechanical strength and durability testing for office chair seats and backs；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CONF-CANT-065GW

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CONF-CANT-065GW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CONF-CANT-065GW打开导出工具

页面快速操作

发布采购询价

产品描述

The Fixed Cantilever Mesh Back Conference Visitor Chair, model CONF-CANT-065GW, presents a streamlined, professional silhouette tailored for collaborative and guest-facing spaces. Its visual design balances crisp, contemporary contrast and functional structure: an olive green woven polyester seat with crisp white edge trim pairs with a taut, breathable nylon mesh back, supported by white molded structural frames and a polished chrome-plated steel cantilever sled base. Fixed T-shaped armrests match the white frame finish, sitting at a height aligned to standard desk surfaces, while smooth anti-slip nylon glides finish the base for a clean, unobtrusive profile that sits neatly beneath table edges when not in use. Construction prioritizes durability and long-term comfort across frequent commercial use. The cantilever base is formed from 2.0mm wall thickness chrome-plated steel tube, engineered to deliver controlled 8° dynamic flex that yields gently with seated movement without compromising structural stability. The backrest and armrest supports use white molded polypropylene reinforced with 20% glass fiber for rigid, long-lasting shape retention, while the back panel uses high-tensile nylon mesh shaped with a built-in contoured lumbar curve for consistent postural support. The seat features a high-density cold-cured polyurethane foam core wrapped in olive green woven polyester, and injection-molded nylon glides prevent scratches to hard flooring surfaces during repositioning. Functional design is tailored to shared seating use cases. The chair holds a fixed upright seating position, with a 125° back angle supported by three suggested lock positions to suit varied seated preferences across short-to-medium duration sessions, optimized for 4 hours of continuous use in collaborative settings. Fixed armrests align to standard desk height to support relaxed arm positioning during meetings or discussions, while the non-stacking frame maintains a sturdy, consistent placement in arranged seating layouts. This chair is well suited for a range of commercial and flexible residential work spaces, including corporate conference rooms paired with standard 760mm height conference tables, office reception and guest waiting areas, corporate training rooms, and classroom-style seating rows arranged in straight lines. It is fully compatible with tile, wood, and laminate hard flooring, and pairs cohesively with 2.4m executive desks for formal meeting setups. Procurement teams should note key logistical and design details to plan for rollout: each chair ships across two cartons, with an assembly time of 40 minutes per unit. The fixed non-stacking design requires allocated storage space when not in use, and 135 sets can be loaded into a 20GP container at 85% space utilization for bulk orders. The unbranded design allows for seamless integration into existing office furnishing schemes without conflicting with established brand visual standards, making it a flexible choice for multi-space furnishing projects.

Fixed Cantilever Mesh Back Conference Visitor Chair with Olive Green Padded Seat Specifications

供应商与现货