Name: Grey Mesh Back Cantilever Sled Base Meeting Office Chair
Brand: YUXIANG
SKU: DT52H6

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	545 × 560 × 985 mm
Overall assembled dimensions	545 x 560 x 985 mm
Seat surface height	440 mm
Seat usable width	480 mm
Seat usable depth	470 mm
Seat cushion thickness	70 mm
Backrest total height above seat	550 mm
Backrest frame width	470 mm
Armrest height above seat	180 mm
Armrest-to-armrest outer width	620 mm
Sled base front-to-rear length	560 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	15 kg
Maximum recommended user weight	200 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	45 %
Mesh back fabric abrasion resistance	50000 Martindale cycles
Frame tubing wall thickness	1.5 mm
Floor glide static load per foot	75 kg
Stackable storage capacity	5 chairs
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Cantilever support frame	1.5mm thick chrome-plated polished steel tubular frame
Backrest support panel	Injection-molded nylon inner frame with tensioned breathable mesh
Seat cushion core	High-density molded polyurethane foam padding
Seat upholstery	Woven polyester fabric cover over foam cushion
Backrest upholstery	Breathable tensioned polyester mesh fabric
Armrest construction	Integrated chrome steel arm supports with smooth padded contact surface
Seat support base	12mm thick plywood structural board under seat cushion
Floor contact glides	Injection-molded anti-slip plastic end caps on sled feet
Frame finish	Mirror polished triple-layer chrome plating on steel tubing
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating posture	Fixed upright ergonomic seat-to-back angle of 100 degrees for conference use
Mobility design	Fixed sled base with floor glides, no casters or swivel mechanism
Height adjustment	No gas lift height adjustment, fixed 440mm seat height for standard desk use
Arm support	Fixed integrated armrests providing 180mm height support above seat surface
Floor protection	Anti-slip plastic glides prevent hard floor scratching and reduce movement noise
Storage design	Compatible with vertical stacking up to 5 chairs for compact storage
Back support	Contoured lumbar support integrated into lower mesh backrest
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room seating	Suitable for fixed meeting room setups with standard 760 mm height conference tables
Reception and visitor areas	Suitable for corporate lobby, waiting area and guest reception seating
Training room seating	Suitable for training facilities where stackable, durable fixed seating is required
Staff side/visitor seating	Suitable for placement alongside workstations for visiting colleagues or clients
Public service areas	Suitable for bank, hospital, government and other public service counter seating
Home office secondary seating	Suitable as guest seating for residential home office workspaces
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Office furniture - Office work chairs - Part 1: Dimensions, applicable for fixed seating dimension compliance
EN 1335-2:2018	Office furniture - Office work chairs - Part 2: Safety requirements, applicable for structural safety
EN 1022:2019	Furniture - Seating - Determination of stability, applicable for cantilever chair tip resistance

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 Test 5	Chair back static load test, applicable for backrest structural strength validation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for metal furniture, applicable to structural frame performance
GB/T 35607-2017	Upholstered furniture VOC emission limits, applicable for indoor air quality compliance
GB/T 10357.3-2013	Furniture mechanical performance test for chair seat and back static load

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for metal furniture, applicable to structural frame performance；
2. GB/T 35607-2017：Upholstered furniture VOC emission limits, applicable for indoor air quality compliance；
3. GB/T 10357.3-2013：Furniture mechanical performance test for chair seat and back static load；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MC-CSLD-MESH-098

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MC-CSLD-MESH-098

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MC-CSLD-MESH-098打开导出工具

页面快速操作

发布采购询价

产品描述

The YUXIANG MC-CSLD-MESH-098 is a modern cantilever sled-base meeting and visitor office chair designed for consistent, functional seating across commercial and residential settings. Its clean, streamlined silhouette features an upright, contoured mesh back paired with a neatly tailored woven fabric seat, supported by a smooth, mirror-polished chrome frame that complements contemporary interior palettes. The fixed cantilever structure creates an open, uncluttered visual profile that fits seamlessly in both formal and casual shared spaces, with integrated armrests that align neatly with the frame line for a cohesive look. Built for regular high-traffic use, the chair’s frame is constructed from thick-walled polished steel tubing with a triple-layer chrome finish for a durable, reflective surface. The backrest uses a tensioned breathable polyester mesh stretched over an injection-molded nylon inner frame, with built-in contoured lumbar support in the lower section for steady upright positioning. The seat rests on a sturdy plywood structural board, topped with high-density molded polyurethane foam wrapped in woven polyester upholstery for balanced comfort during extended seated sessions. Integrated chrome arm supports feature smooth padded contact surfaces, and the sled base ends in anti-slip injection-molded plastic glides that protect hard flooring from scratches and cut down on movement noise. The chair holds a fixed 100-degree seat-to-back angle optimized for conference use, with no swivel mechanism, casters, or height adjustment to maintain consistent positioning aligned with standard desk heights. It supports vertical stacking of up to 5 units to minimize required storage space when not in use. This model is well suited for fixed meeting room setups paired with standard height conference tables, corporate lobbies, reception and waiting areas, and training facilities requiring durable, easy-to-store fixed seating. It also works as side seating alongside office workstations for visiting colleagues or clients, public service counter seating in banks, hospitals and government offices, and as guest seating in residential home office spaces. When planning procurement, note that each unit ships in two cartons, with a per-unit assembly time of 40 minutes. Shipping planning can align with 20GP container load capacities for bulk orders, and the armless variant is sold separately for projects requiring that configuration.

Grey Mesh Back Cantilever Sled Base Meeting Office Chair Specifications

供应商与现货