纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 605 × 1100 mm
Seat width	510 mm
Seat depth	460 mm
Seat height from floor	460 mm
Backrest width	460 mm
Backrest height from seat	670 mm
Armrest height above seat	210 mm
Armrest depth from seat front edge	410 mm
Sled base span (front-to-back)	605 mm
Armrest to armrest inner width	510 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	15 kg
Recommended static load capacity	113 kg
Seat foam density	65 kg/m³
Seat foam thickness	30 mm
Mesh abrasion resistance	50000 cycles
Cantilever frame static load rating	102 kg
Seam stitch pitch	8 stitches per 30mm
Warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest construction	Breathable polyester office mesh tensioned over PP inner frame
Seat cushion core	High-density polyurethane foam with woven fabric upholstery
Cantilever frame tubing	25mm diameter 2.0mm thick matte black powder-coated steel
Armrests	Fixed integrated black polypropylene loop arms connecting seat frame to backrest
Floor glides	Injection-molded non-slip polypropylene glides at sled base contact points
Seat support plate	1.5mm thick molded plywood core under seat foam
Frame finish	Matte black electrostatic powder coating on all steel components
Mesh stretch resistance	30% glass-fiber reinforced PP back frame for mesh tension retention
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Base configuration	Fixed cantilever sled base with no casters, no swivel, no height adjustment
Seat ergonomics	Waterfall front seat edge to reduce under-leg pressure during extended sitting
Back support	Integrated curved lumbar support shaping in mesh back for upright seated posture
Arm support	Fixed closed-loop armrests providing stable upper body support for meeting use
Flex characteristic	Slight controlled flex in cantilever frame for gentle seated movement without recline lock
Floor protection	Non-marring PP glides suitable for hard commercial flooring without scratching
Assembly configuration	Knock-down construction requiring simple frame-to-seat bolt assembly
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room seating	Arranged around meeting tables for boardrooms, team meeting spaces and interview rooms
Reception and guest areas	Used in office lobbies, waiting zones and visitor reception spaces
Training room seating	Deployed in corporate training rooms and lecture spaces for multi-hour seated use
Open office guest seating	Positioned at desk sides for impromptu discussions and visitor seating adjacent to workstations
Home office supplemental seating	Used as extra seating for home offices and small studio workspaces
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013 Level 2	Applicable standard for non-domestic seating strength, durability and stability for office use
EN 1022:2018	Applicable standard for seating stability determination for adult office seating
EN 1335-2:2018	Applicable standard for office chair safety requirements for contract use

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017	Applicable standard for general-purpose office chairs, static, fatigue and impact test requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3-2013	Applicable standard for mechanical strength and durability testing of office seating
GB/T 35607-2017	Applicable standard for green product evaluation of furniture, volatile emission limits
GB 28007-2011	Applicable safety standard for general seating, stability and structural safety requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3-2013：Applicable standard for mechanical strength and durability testing of office seating；
2. GB/T 35607-2017：Applicable standard for green product evaluation of furniture, volatile emission limits；
3. GB 28007-2011：Applicable safety standard for general seating, stability and structural safety requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MC-SLED-MESH-BLK-620

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MC-SLED-MESH-BLK-620

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MC-SLED-MESH-BLK-620打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Mesh Back Cantilever Sled Base Meeting Office Chair (model MC-SLED-MESH-BLK-620) is an unbranded seating solution designed for collaborative and guest-facing spaces, with a streamlined monochromatic black aesthetic that aligns with modern commercial and residential work interiors. Its low-profile fixed cantilever sled base creates an open, uncluttered silhouette, while integrated closed-loop armrests create a cohesive visual profile that suits both formal and casual layout arrangements. The chair’s construction balances durability and seated comfort: the backrest uses breathable polyester office mesh tensioned over a 30% glass-fiber reinforced polypropylene inner frame, shaped with integrated curved lumbar support to encourage upright posture. The contoured seat features a high-density 65 kg/m³ polyurethane foam core 30mm thick, supported by a 14mm bent plywood base, upholstered in woven fabric with a waterfall front edge to reduce under-leg pressure during extended sitting. The frame is built from 25mm diameter, 2.0mm thick steel finished with matte black electrostatic powder coating, with fixed integrated polypropylene armrests that connect the seat frame directly to the back structure for stable upper body support. Non-slip, injection-molded polypropylene glides at the sled base contact points protect hard commercial flooring from scratches, while the cantilever frame delivers slight controlled flex for gentle seated movement without recline, swivel, caster, or height adjustment functions. The mesh back offers 50,000 cycles of abrasion resistance, the cantilever frame carries a 102kg static load rating, and the chair supports a 113kg recommended static load. All steel components feature a uniform matte black powder coat finish, with consistent seam stitching of 8 stitches per 30mm for upholstery durability. This chair is well-suited for arrangement around meeting tables in boardrooms, team meeting spaces, and interview rooms, as well as deployment in office lobbies, waiting zones, visitor reception areas, corporate training rooms, and lecture spaces. It also works as side guest seating adjacent to open office workstations for impromptu discussions, and as supplemental seating for home offices and small studio workspaces, with a recommended pairing with 2.4m executive desks. Procurement teams should note the chair ships as knock-down construction across two cartons per set, with 40 minutes of assembly required per unit. Packaged sets weigh 23kg, with a carton volume of 0.26m³, and 135 sets fit in a 20GP container at 85% space utilization, supporting efficient bulk planning for large fit-out projects.

Black Mesh Back Cantilever Sled Base Meeting Office Chair Specifications

供应商与现货