纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	740 × 780 × 960 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	140 kg
Product net weight	16 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	35%
Seating capacity	1 person
Upholstery abrasion acceptance value	50,000 Martindale cycles
Seam stitch density	8 stitches per 50 mm
Static leg-frame acceptance load	300 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Dark gray upholstered padded surface over foam, likely leather-look leatherette; material grade requires supplier BOM confirmation
Back upholstery	Beige smooth padded upholstery with a horizontal seam below the flared head section
Outer shell	Dark gray upholstered wraparound shell forming the lower back and arm sides
Inner arm pads	Beige upholstered integrated pads blending into the back panel
Seat cushioning	Polyurethane foam core with upholstered cover and fixed padded front panel
Back cushioning	Polyurethane foam or fiber-filled padded panel attached to the supporting back frame
Internal support frame	18 mm hardwood-composite or plywood carrier with screwed metal mounting plates
Legs	Dark bronze powder-coated steel tube legs, four pieces with floor-contact feet
Foot caps	Injected polymer non-marking glides fitted to each tube end
Joining hardware	M8 steel mounting bolts with welded or bolted leg plates recommended
Edge tailoring	Precise single-needle upholstery seams along back, arms, and cushion perimeter
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating posture	Fixed lounge posture with 100-degree back angle for relaxed reception and waiting use
Back support	Two-zone padded back with lumbar panel and flared upper shoulder section
Arm support	Integrated wraparound low arms support forearms while preserving an open side profile
Leg stability	Four outward-splayed legs provide a 640 mm floor footprint and resist tipping under lateral movement
Floor protection	Polymer glides at four leg ends reduce floor marking and noise on hard surfaces
Cushion retention	Fixed seat cushion integrated with the chair shell rather than a removable loose cushion
Cleaning access	250 mm under-shell clearance permits vacuuming and floor cleaning around the footprint
Stacking	Non-stacking single-piece lounge chair with rigid angled legs
Swivel	Fixed non-swivel base using four stationary legs
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office visitor area	Placed opposite a desk for individual guest seating with padded back and low arm support
Hotel lounge and lobby	Used in pairs beside low tables in hotel lounges or waiting corners
Reception and waiting room	Arranged in rows or clusters for visitors under 140 kg per seat
Meeting breakout space	Used for informal discussion zones where users need relaxed but upright seating
Residential living room or study	Suitable as an accent reading chair in a study, bedroom corner, or living area
Senior executive lounge	Suitable for quiet rooms and executive breakout zones with low-table configurations
Floor compatibility	Best used on level hard floors or low-pile carpet with fitted polymer glides
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LGS-HB740-2T

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LGS-HB740-2T

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LGS-HB740-2T打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Tone Upholstered Lounge Armchair presents a contemporary high-back silhouette defined by a wraparound dark gray shell, beige inner back and arm pads, and four outward-splayed dark bronze metal legs. Its visual character comes from the two-tone finish: the seat, outer shell, and lower arm sides are upholstered in dark gray, while the smooth beige back panel and integrated inner arm pads create a softer center. A horizontal seam below the flared head section separates the upper shoulder area from the lower lumbar zone. The low, continuous arms retain an open profile while visually connecting the back and seat. The chair is built around an internal 18 mm hardwood-composite or plywood carrier with screwed metal mounting plates. The seat uses a polyurethane foam core with an upholstered cover and a fixed padded front panel, while the back is a padded panel attached to the supporting frame. The finished seat cushion is 90 mm thick and the backrest padding is 70 mm thick, with a 240 mm high lumbar support zone. Foam density is specified at 45 kg/m3 for the seat and 35 kg/m3 for the back, with a 35 percent rebound rating. The upholstered surfaces are described as dark gray and beige padded coverings, with the seat material likely having a leather-look leatherette appearance; exact material grade should be confirmed through the supplier bill of materials. The four dark bronze powder-coated steel tube legs terminate in injected polymer non-marking glides. Designed for one occupant, the fixed lounge posture uses a 100-degree back angle suited to relaxed but upright reception, waiting, and conversation settings. The two-zone back provides a dedicated lumbar panel and a flared upper section for shoulder support, while the wraparound low arms support the forearms. The fixed seat cushion integrates with the chair shell rather than operating as a loose cushion, helping maintain a neat presentation. The splayed legs produce a 640 mm floor footprint for stable support, and the polymer glides reduce floor marking and noise on hard surfaces. A 250 mm under-shell clearance leaves room for vacuuming and floor cleaning around the chair. Overall dimensions are 740 by 780 by 960 mm, with 540 mm of clear width between the armrests. Recommended user weight capacity is 140 kg, product net weight is 16 kg, and the upholstery abrasion acceptance value is 50,000 Martindale cycles. These attributes make the armchair appropriate for executive office visitor positions, hotel lounges and lobbies, reception and waiting rooms, meeting breakout areas, senior executive lounges, and quiet discussion zones. It also works as a residential accent chair in a living room, study, or bedroom reading corner. For procurement, the model is unbranded and identified as LGS-HB740T. Each set ships in two cartons, with packaged gross weight of 23 kg, reference assembly time of 40 minutes, and reference carton dimensions of 850 by 420 by 720 mm.

Two-Tone Upholstered Lounge Armchair with Splayed Metal Legs Specifications

供应商与现货