纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2040 × 2140 × 1330 mm
Headboard height	1330 mm
Floor to top of mattress platform	250 mm
Underbed storage compartment height	300 mm
Ground clearance under frame	40 mm
Recommended mattress thickness	406 mm
Matching nightstand dimensions	500 x 400 x 550 mm
Wing extension depth from headboard face	120 mm
Slat width	70 mm
Slat thickness	25 mm
Slat spacing	75 mm
Side Rail Thickness	40 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static load capacity	454 kg
Recommended number of users	2
Net weight (frame only)	100 kg
Slat system static point load	120 kg
Hydraulic lift cycle rating	10000 open/close cycles
Upholstery abrasion resistance	30000 Martindale cycles
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Headboard upholstery	Linen-look woven fabric
Headboard padding	30mm thick high-resilience polyurethane foam
Side rail/footboard upholstery	Matching off-white woven fabric
Internal bed frame	18mm thick plywood + 1.2mm thick steel square tube reinforcement
Support slats	Solid pine wood slats
Support legs	20mm diameter black powder-coated steel legs
Lift mechanism hardware	Class 2 gas hydraulic struts with reinforced steel hinges
Storage compartment base	Non-woven fabric dust cover lining
Hardware connectors	Zinc-plated steel bolts and barrel nuts
Seam stitch pitch	8 stitches per 30mm
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Lift-up underbed storage	Hydraulic gas strut assisted platform lifts from foot end to access full underbed cavity
Anti-slide mattress retention	Metal stopper at head end of platform prevents mattress shifting during lift
No box spring required	Solid wood slat platform directly supports standard mattresses
Soft-close lift mechanism	Controlled hydraulic lowering prevents slamming of the mattress platform
Wingback headboard support	Curved upholstered wings provide side draft blocking and seated back support
Knockdown assembly	Frame disassembles into flat-packed sections for transport
Noise damping	EVA foam pads at slat and frame joints reduce squeaking during use
Nightstand storage (matching set option)	Two soft-close drawers per matching upholstered nightstand
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Shipping carton dimensions (master)	2200 x 1300 x 350 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential master bedroom	King size platform fits 3.5m+ wide bedroom layouts for primary sleeping use
Small-space urban apartments	Integrated underbed storage eliminates need for separate dressers or storage chests
Modern light luxury interior schemes	Off-white curved wingback design pairs with neutral, contemporary or minimalist decor
Matching bedroom set configurations	Coordinates with paired 2-drawer upholstered nightstands for coordinated room design
Users preferring low-profile beds	Low platform height provides easy access for adults without high step-over

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998	Domestic furniture beds and mattresses safety and strength requirements
EN 1022:2018	Domestic furniture seating stability test applicable to bed edge use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to frame strength and finish
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture
GB/T 1952.2-2011	General technical requirements for upholstered furniture mattresses/bed frames

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to frame strength and finish；
2. GB 18584-2001：Indoor decoration material limit of harmful substances for wooden furniture；
3. GB/T 1952.2-2011：General technical requirements for upholstered furniture mattresses/bed frames；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UPB-LIFT-WB-OW-K1

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UPB-LIFT-WB-OW-K1

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UPB-LIFT-WB-OW-K1打开导出工具

页面快速操作

发布采购询价

产品描述

This off-white upholstered lift-storage platform bed features a curved wingback headboard for a soft, contemporary silhouette. The headboard extends gently outward on both sides to create a framed, cozy seating nook, while the low-profile platform sits close to the floor for a streamlined, unobtrusive presence. The entire frame is finished in matching linen-look woven off-white fabric, with black powder-coated steel legs providing subtle visual contrast at the base. The bed’s inner structure combines engineered plywood reinforced with steel square tube framing, supported by solid pine wood slats that eliminate the need for a separate box spring. All fabric surfaces are padded with high-resilience polyurethane foam for a plush, tactile finish, while EVA foam pads at slat and frame joints reduce operational noise during use. The lift mechanism uses Class 2 gas hydraulic struts with reinforced steel hinges, paired with zinc-plated steel connectors for secure assembly, and the underbed storage cavity is lined with a non-woven fabric dust cover to protect stored items. Functionality centers on the hydraulic-assisted lift platform, which raises from the foot end to grant full access to the enclosed underbed storage compartment, with a soft-close feature to prevent slamming during lowering. A metal stopper at the head of the platform holds the mattress in place when the lift is activated, while the curved wingback sections block side drafts and provide stable back support for seated use, such as reading in bed. The frame ships in flat-packed sections for efficient transport, with straightforward assembly for on-site setup. This king-size model is well suited for residential master bedrooms, particularly layouts with three and a half meters or more of width to accommodate the frame, and for small-space urban apartments where integrated storage removes the need for freestanding dressers or storage chests. Its neutral off-white finish and curved wingback design complement modern light luxury, minimalist, and neutral contemporary interior schemes, and it coordinates with matching 2-drawer upholstered nightstands for a cohesive room setup. The low platform height also makes it ideal for users who prefer easy bed access without a high step-over. For procurement planning, note that the bed ships across multiple cartons with a total packaged gross weight of 130 kg per set, and reference assembly time is 40 minutes per unit. The slat system is engineered to support a total static load aligned with two-person use, and the upholstery holds up to regular daily contact consistent with residential use. The hydraulic lift mechanism is rated for long-term repeated operation, making this model a durable choice for both residential settings and select hospitality applications where integrated storage and polished aesthetic are priorities.

Off-White Upholstered Lift-Storage Platform Bed with Curved Wingback Headboard Specifications

供应商与现货