纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1844 × 2215 × 1308 mm
Inner mattress fit dimensions	1524 x 2032 mm
Headboard thickness	152 mm
Floor to slat support height	356 mm
Under-bed clearance	0 mm
Wing panel projection from headboard face	120 mm
Side rail height above slat surface	300 mm
Contrast trim width on edges	20 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static total weight capacity	454 kg
Recommended mattress thickness	305 mm
Product net weight	69 kg
Slat static load rating per slat	25 kg
Upholstery abrasion resistance	30000 double rubs
Recommended maximum user weight per side	136 kg
Warranty period	365 days
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Woven velvet fabric, mustard olive finish
Headboard padding	38mm high-density polyurethane foam, 35kg/m³ density
Internal frame	Kiln-dried pine and 18mm plywood structural panels
Support slats	12mm thick poplar wood slats, spaced 70mm apart
Center support beam	40mm x 80mm solid wood beam with 3 support points
Edge contrast trim	Woven light neutral fabric whipstitch detail
Frame connectors	Zinc-plated steel hardware, M8 bolt size
Noise reduction padding	3mm EVA foam on all slat and frame contact points
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Mattress support	Wood slat platform system, no box spring required for proper support
Headboard function	Tufted padded wing panels provide back support for seated bed use
Mattress retention	Recessed side and end rails prevent mattress shifting during use
Assembly required	Knock-down assembly with included hardware, two-person installation
Cleaning requirement	Spot clean only with upholstery-safe cleaner to preserve velvet finish
Edge protection	Contrast whipstitch trim reinforces high-wear corner and edge seams
Under-bed design	Floor-flush base eliminates dust accumulation below the frame
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential primary bedroom	Fits standard queen mattress for main bedroom use in homes
Contemporary interior schemes	Warm velvet finish complements modern and eclectic decor styles
Guest bedroom installation	Low-profile design works for compact guest room spaces
Upholstered furniture collections	Pairs with fabric dressers and nightstands for coordinated bedroom sets
Low-clearance room design	Floor-skimming base suits rooms with minimal under-bed cleaning access

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998	Domestic furniture - Beds and mattresses - Safety requirements and test methods
EN 1021-1:2014	Upholstered furniture ignitability resistance to smouldering cigarette

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal frame
GB 18584-2001	Limit of formaldehyde emission for wooden furniture interior materials
GB/T 1952.2-2011	General technical requirements for upholstered furniture bedding

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to internal frame；
2. GB 18584-2001：Limit of formaldehyde emission for wooden furniture interior materials；
3. GB/T 1952.2-2011：General technical requirements for upholstered furniture bedding；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WB-PLT-Q-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WB-PLT-Q-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WB-PLT-Q-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tufted Velvet Wingback Platform Bed with Contrast Edge Trim, model WB-PLT-Q-01, is an unbranded upholstered wingback platform bed built for cohesive, functional bedroom setups. Visually, the piece features a structured wingback headboard with grid-tufted detailing, finished in woven mustard olive velvet accented by 20mm light neutral woven fabric whipstitch trim along all exposed edges. Its floor-skimming, footboard-free base sits flush to the floor, with wing panels projecting 120mm from the headboard face to frame the sleep surface, creating a tailored, contemporary silhouette that balances soft texture with crisp, defined lines. Constructed for long-term residential use, the bed’s internal frame combines kiln-dried pine and 18mm plywood structural panels, secured with zinc-plated M8 steel hardware. The headboard is padded with 38mm high-density polyurethane foam rated at 35kg/m³ for consistent, supportive cushioning, while the platform support system uses poplar wood and bent plywood slats spaced for even weight distribution, supported by a central solid wood beam with three fixed support points. EVA foam padding at all slat and frame contact points minimizes operational noise, and the velvet upholstery is rated for 30000 double rubs to withstand regular contact. The 20mm contrast whipstitch trim adds dual purpose, reinforcing high-wear corner and edge seams to reduce fraying over time. Practically, the wood slat platform eliminates the need for a separate box spring, providing stable support for a standard queen mattress sized to fit the 1524 x 2032mm inner frame, with a recommended 305mm mattress thickness. Recessed side and end rails prevent mattress shifting during use, and the padded tufted wing panels offer comfortable back support for seated activities like reading in bed. The floor-flush base eliminates under-bed gaps to prevent dust accumulation, ideal for spaces where regular under-bed cleaning access is limited. Maintenance requires only spot cleaning with upholstery-safe products to preserve the velvet finish. The bed ships knock-down for two-person assembly, with all required hardware included and a typical assembly time of 40 minutes. This model suits residential primary bedrooms, compact guest rooms, and contemporary or eclectic interior schemes, pairing seamlessly with fabric dressers and nightstands for coordinated room sets. It supports a total static weight of 454kg, with a 136kg maximum recommended user weight per side. Procurement teams should note the product ships across multiple cartons per set, with a total packaged gross weight of 130kg and 365-day warranty coverage, and plan for appropriate two-person delivery and installation support.

Tufted Velvet Wingback Platform Bed with Contrast Edge Trim Specifications

供应商与现货