纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 2200 × 1180 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	85 kg
Recommended mattress weight capacity	150 kg
Total static load capacity	350 kg
Recommended user count	2
Recommended mattress thickness	250 mm
Frame joint cyclic durability	10000 cycles
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Headboard upholstery	Linen-look woven polyester fabric, 350 gsm
Accent trim	PU leather, 1.2 mm thick
Headboard cushion core	High resilience polyurethane foam, 35 kg/m3 density
Inner bed frame	Solid pine wood + 15 mm thick plywood, 30 mm x 50 mm joists
Support legs	Matte black powder-coated carbon steel, 30 mm diameter
Bed base upholstery	Matching light gray polyester fabric, same as headboard
Slat support system	12 mm thick bentwood slats, 60 mm gap between slats
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tufted headboard support	6 segmented padded panels with vertical stitching for ergonomic back support when sitting upright
Under-bed storage compatibility	Lift-up storage mechanism or pull-out drawer can be fitted within 300 mm internal base height
Mattress ventilation	Evenly spaced bentwood slats allow 70% air circulation under mattress to prevent moisture buildup
Wall alignment design	Flat rear headboard panel sits flush against wall with 20 mm gap for baseboard clearance
Noise reduction design	Felt pads installed at all slat-frame joints to eliminate friction squeak during use
Edge support reinforcement	40 mm thick upholstered side rails prevent mattress edge sag and extend usable sleep surface
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary residential application	Master bedroom in apartments and family homes
Secondary residential application	Guesthouse and boutique hotel guest rooms
Recommended matching furniture	Pair with two matching 2-drawer upholstered nightstands for coordinated bedside storage
Style compatibility	Pairs with light wood-look flooring, neutral linen curtains and minimal wall decor
Mattress pairing recommendation	Compatible with all spring, memory foam and hybrid mattresses 280 mm thick

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Domestic bed safety standard	EN 747:2012+A1:2015
Upholstered furniture flammability	EN 1021:2014

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Formaldehyde emission limit	GB 18584
Structural safety requirement	GB/T 3324

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Formaldehyde emission limit：GB 18584；
2. Structural safety requirement：GB/T 3324；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · BD-UPLQ-OR01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · BD-UPLQ-OR01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BD-UPLQ-OR01打开导出工具

页面快速操作

发布采购询价

产品描述

This upholstered queen size platform bed features a refined modern light luxury aesthetic defined by a tufted headboard and clean, streamlined silhouettes. The headboard is structured with six segmented padded panels accented by vertical stitching, framed with subtle PU leather trim, and finished in a soft light gray linen-look woven polyester fabric that wraps seamlessly across the matching bed base. Its flat rear panel sits flush against walls, with a dedicated gap to accommodate standard baseboards for a polished, gap-free installed look. The side rails carry the same upholstered finish for a cohesive visual profile across the entire frame. The bed is built on a sturdy inner frame constructed from solid pine wood and plywood, reinforced with structured wooden joists. The headboard cushion uses high resilience polyurethane foam for consistent, comfortable support, while the support system relies on matte black powder-coated carbon steel legs. The slat platform uses durable bentwood or solid timber slats, with felt pads fitted at every slat-frame joint to reduce friction noise during use. All corner joints use heavy-duty bolts with multiple fixing points to ensure structural stability through regular assembly and use. Functionally, the tufted headboard delivers ergonomic back support for sitting upright to read or relax in bed. The evenly spaced slat system enables consistent air circulation under the mattress to reduce moisture buildup, while thick upholstered side rails reinforce edge support to prevent mattress sag and expand the usable sleep surface. The internal base height accommodates add-on lift-up storage mechanisms or pull-out drawers for flexible under-bed organization. The frame is compatible with all spring, memory foam, and hybrid mattresses of the appropriate thickness, and is sized to comfortably accommodate two users. This bed is ideally suited for master bedrooms in apartments and family homes, as well as guest rooms in guesthouses and small boutique hotels. It pairs seamlessly with light wood-look flooring, neutral linen curtains, and minimal wall decor, and can be coordinated with matching upholstered two-drawer nightstands for a unified bedroom scheme. For procurement, note that the product ships across multiple cartons, requires roughly two-person assembly, and that purchasers selecting integrated storage should verify fitting compatibility with the frame’s internal base dimensions before adding accessory components. Total static load capacity aligns with standard residential and light hospitality use cases, and the slat configuration removes the need for an additional box spring for most mattress types.

Upholstered Queen Size Platform Bed with Tufted Headboard Specifications

供应商与现货