| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 2200 x 1180 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Net weight | 85 kg | |
|---|---|---|
| Recommended mattress weight capacity | 150 kg | |
| Total static load capacity | 350 kg | |
| Recommended user count | 2 | |
| Recommended mattress thickness | 250 mm | |
| Frame joint cyclic durability | 10000 cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Linen-look woven polyester fabric, 350 gsm | |
|---|---|---|
| Accent trim | PU leather, 1.2 mm thick | |
| Headboard cushion core | High resilience polyurethane foam, 35 kg/m3 density | |
| Inner bed frame | Solid pine wood + 15 mm thick plywood, 30 mm x 50 mm joists | |
| Support legs | Matte black powder-coated carbon steel, 30 mm diameter | |
| Bed base upholstery | Matching light gray polyester fabric, same as headboard | |
| Slat support system | 12 mm thick bentwood slats, 60 mm gap between slats | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Tufted headboard support | 6 segmented padded panels with vertical stitching for ergonomic back support when sitting upright | |
|---|---|---|
| Under-bed storage compatibility | Lift-up storage mechanism or pull-out drawer can be fitted within 300 mm internal base height | |
| Mattress ventilation | Evenly spaced bentwood slats allow 70% air circulation under mattress to prevent moisture buildup | |
| Wall alignment design | Flat rear headboard panel sits flush against wall with 20 mm gap for baseboard clearance | |
| Noise reduction design | Felt pads installed at all slat-frame joints to eliminate friction squeak during use | |
| Edge support reinforcement | 40 mm thick upholstered side rails prevent mattress edge sag and extend usable sleep surface | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary residential application | Master bedroom in apartments and family homes | |
|---|---|---|
| Secondary residential application | Guesthouse and boutique hotel guest rooms | |
| Recommended matching furniture | Pair with two matching 2-drawer upholstered nightstands for coordinated bedside storage | |
| Style compatibility | Pairs with light wood-look flooring, neutral linen curtains and minimal wall decor | |
| Mattress pairing recommendation | Compatible with all spring, memory foam and hybrid mattresses 280 mm thick |
EU Market Access Requirements* EN Standards
| Domestic bed safety standard | EN 747:2012+A1:2015 | |
|---|---|---|
| Upholstered furniture flammability | EN 1021:2014 |
Standards applicable to China-market projects
| Formaldehyde emission limit | GB 18584 | |
|---|---|---|
| Structural safety requirement | GB/T 3324 |
This product must meet the following technical requirements: 1. Formaldehyde emission limit: GB 18584; 2. Structural safety requirement: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
