纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1600 × 1400 × 1100 mm
Primary work surface height (floor to desktop)	750 mm
Seated knee clearance height (floor to modesty panel apron)	680 mm
Primary work surface width (leg end to return cabinet)	1400 mm
Primary work surface depth (user edge to privacy divider)	700 mm
Side return storage cabinet width	400 mm
Side return storage cabinet depth	600 mm
Desktop perforated privacy divider height above work surface	300 mm
Upper storage hutch cubby height above work surface	350 mm
Desktop cable grommet diameter	60 mm
Modesty panel cable pass-through diameter	60 mm
Desk top panel thickness	25 mm
Splayed steel leg tube wall thickness	1.5 mm
Edge banding thickness on work surface	2 mm
Lower storage drawer internal height	150 mm
Finished Top Thickness	50 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Work surface static uniform load capacity	113 kg
Recommended maximum user weight capacity	136 kg
Leveling foot adjustment range	10 mm
Drawer slide operational cycle rating	50000 cycles
Desk unit net weight	78 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface panels	25mm E1-grade melamine-faced particle board
Support legs	Powder-coated white steel splayed legs with rust-orange accent bracket
Desktop privacy divider	Perforated brown engineered wood panel with orange mounting clips
Storage cabinet and hutch panels	18mm melamine-faced MDF with matching light beige finish
Drawer and cabinet hardware	Zinc-plated steel lock core with 2 supplied keys, metal drawer slides
Cable management grommets	ABS plastic round cable ports with brush inserts
Cabinet base leveling feet	Nylon adjustable glide feet with steel threaded stems
Modesty panel	18mm melamine-faced engineered wood panel with cable pass-throughs
Edge banding	2mm thick PVC impact-resistant edge trim on all work surface edges
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Desktop privacy divider	Fixed perforated panel mounted mid-work surface to block direct line of sight between adjacent seated staff
Cable management system	Dual 60mm cable ports route power and data cables from desktop to under-desk area, eliminating surface cord clutter
Lockable lower storage drawer	Key-locking drawer secures personal office items and confidential documents, supplied with 2 unique keys
Splayed leg support structure	Angled A-frame steel leg distributes work surface weight evenly, eliminating cross-braces that obstruct leg movement
Adjustable leveling feet	Threaded glide feet at cabinet base adjust to compensate for uneven floors, keeping work surface perfectly level
Modesty panel	Fixed front panel below work surface blocks view of under-desk cabling and user legs for professional office appearance
Fixed return orientation	Right-side mounted storage return creates L-shaped workflow with dedicated primary work zone and adjacent storage zone
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office staff workstations	Low privacy divider reduces visual distraction while maintaining open office collaboration space
Small business private staff offices	Compact L-shaped footprint provides dedicated work surface and storage without excess floor space usage
Startup flexible workspaces	Neutral light beige finish with warm orange accents complements modern flexible office interior design
Coworking dedicated desks	Lockable drawer provides secure personal storage for members using assigned long-term workstations
Home office workspaces	Integrated cable management and storage reduce clutter for professional remote work setups
Corporate department work areas	Standard 750mm work height is compatible with all standard ergonomic office task chairs

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applicable to structural stability testing
EN 527-2:2002+A1:2019	Office worktables dimensional safety requirements, applicable to ergonomic clearance verification
EN 14073-2:2004	Office storage furniture safety requirements, applicable to drawer and hutch load testing

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard, applicable to load and cycle durability validation
ANSI/BIFMA X5.9-2019	Storage units performance standard, applicable to drawer and shelf load verification

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional tolerance and surface finish verification
GB/T 3327-2022	Performance requirements for office desks, applicable to load capacity and structural stability testing
GB 18580-2017	Formaldehyde emission limits for wood-based panels, applicable to indoor air quality acceptance
GB/T 4897.3-2015	Requirements for particle board used in furniture, applicable to substrate material verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to dimensional tolerance and surface finish verification；
2. GB/T 3327-2022：Performance requirements for office desks, applicable to load capacity and structural stability testing；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, applicable to indoor air quality acceptance；
4. GB/T 4897.3-2015：Requirements for particle board used in furniture, applicable to substrate material verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-L1600-PRH-CM

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-L1600-PRH-CM

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-L1600-PRH-CM打开导出工具

页面快速操作

发布采购询价

产品描述

This single-seat L-shaped staff office workstation balances functional privacy, accessible storage, and clean modern styling to suit a range of work environments. Its fixed right-side return creates a distinct L-shaped layout, separating a generous primary work zone from an adjacent integrated storage area to support smooth, uninterrupted workflow. A perforated brown privacy divider sits mid-work surface, paired with a matching front modesty panel to reduce visual distraction between adjacent seated users and block sightlines to under-desk cabling and user legs, while still preserving the open feel of collaborative spaces. Warm orange mounting clips for the divider and matching rust-orange accent brackets on the splayed steel legs add subtle visual contrast against the light beige finish of the work surfaces and storage panels, complementing contemporary interior design palettes.
The workstation is built for durable daily use, with 25mm E1-grade melamine-faced particle board for the main work surface, edged with 2mm impact-resistant PVC trim to withstand regular contact. Storage components use 18mm melamine-faced MDF with a matching finish, supported by powder-coated white steel splayed legs arranged in an angled A-frame structure that removes obstructive cross-braces to maximize leg room. Perforated MDF forms the privacy divider, while nylon leveling feet with steel threaded stems adjust to compensate for uneven flooring, and ABS cable grommets with brush inserts sit flush to the work surface. Hardware includes zinc-plated lock cores with two supplied keys and smooth metal drawer slides.
Practical features are tailored to reduce workplace clutter and support daily tasks: dual cable ports route power and data cords below the desk to eliminate surface tangles, a lockable lower drawer secures personal items and confidential documents, and the fixed return hutch offers easily accessible adjacent storage for office supplies. The standard 750mm work surface height pairs with all standard ergonomic office task chairs, while 680mm of seated knee clearance ensures comfortable positioning for users.
This unit fits seamlessly into open-plan corporate staff zones, small business private offices, startup flexible workspaces, dedicated coworking desks, and residential home offices set up for remote work. For procurement planning, note that each unit ships across multiple cartons, requires roughly 40 minutes of assembly time, and has a fixed right-side storage return that cannot be repositioned for left-facing L-shape configurations. The neutral finish and understated accent details allow the workstation to coordinate with a wide range of existing office furniture without requiring full space redesign.

Single-Seat L-Shaped Staff Office Workstation with Privacy Divider, Side Storage Hutch and Cable Management Specifications

供应商与现货