纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 1400 × 750 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total worktop static load capacity	600 kg
Product net weight (complete set)	210 kg
Recommended maximum user weight per seat position	120 kg
Worktop surface abrasion resistance (recommended acceptance)	2000 cycles
Drawer slide operation cycle rating (recommended acceptance)	50000 cycles
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop panel	25mm E1-grade particleboard with matte white melamine finish
Support legs	1.5mm thick powder-coated matte silver steel, angled A-frame design
Desktop privacy dividers	18mm MDF with warm walnut wood-grain melamine finish
Mobile pedestal carcass	0.8mm thick cold-rolled steel with matte white powder coating
Pedestal drawer handles	Thin brushed orange-brown metal trim integrated to drawer front
Drawer locks	Keyed cam lock with black plastic escutcheon
Pedestal casters	30mm diameter black nylon swivel casters, 4 per unit
Divider mounting clips	Orange-brown ABS plastic clips securing divider to worktop
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Face-to-face 4-person seating layout	Supports two pairs of opposing users for collaborative team workspaces
Desktop privacy dividers	Blocks direct line of sight between opposite seated users to reduce distraction
Lockable mobile storage pedestals	Includes two rolling pedestals with 2 drawers each, key-locked top drawer for personal document security
Cable management channel access	Recessed gap under divider mounts allows routing of power and data cables along worktop center
Freestanding assembled structure	No permanent floor fixing required, can be repositioned as office layout changes
Smooth drawer extension	Full-extension side-mounted slides allow full access to drawer contents without binding
Leveling adjustment on leg bases	Threaded foot pads compensate for minor unevenness in finished office floors
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan corporate office areas	Provides dedicated individual work space with partial privacy for team departments
Small startup team workspaces	Flexible freestanding layout fits rented office spaces without permanent modification
Government and institution back offices	Neutral color scheme and lockable storage meets administrative office requirements
Training and co-working facilities	Standard dimensions support flexible hot-desking arrangements for rotating users
Recommended paired seating	Mid-back mesh ergonomic office chairs with adjustable height to match 750mm worktop

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applicable for structural performance acceptance
EN 1335-1:2020	Office chair dimensional reference, for matching compatible seating to workstation
EN 14073-2:2004	Office storage furniture safety requirements, applicable to mobile pedestal units

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard, recommended for structural durability acceptance
ANSI/BIFMA X5.1-2017	Office chair performance reference, for compatible seating selection
ANSI/BIFMA X5.9-2019	Storage units performance standard, applicable to mobile pedestal testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to desk panel quality acceptance
GB/T 3325-2017	General technical requirements for metal furniture, applicable to steel leg and pedestal acceptance
GB 18580-2017	Formaldehyde emission limit for wood-based panels, required for indoor office air quality

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to desk panel quality acceptance；
2. GB/T 3325-2017：General technical requirements for metal furniture, applicable to steel leg and pedestal acceptance；
3. GB 18580-2017：Formaldehyde emission limit for wood-based panels, required for indoor office air quality；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFP-2814-4P-MP

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFP-2814-4P-MP

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFP-2814-4P-MP打开导出工具

页面快速操作

发布采购询价

产品描述

The OFP-2814P-MP is an unbranded four-person face-to-face open office workstation paired with mobile pedestals and desk dividers, designed for modern flexible work environments. In visual form and layout, it adopts a symmetrical opposing seating arrangement for four users, with a matte white 2800 x 1400 mm worktop set at a 750 mm standard desk height. Warm walnut wood-grain MDF dividers run along the worktop center, secured by orange-brown ABS mounting clips, while angled A-frame matte silver powder-coated steel legs create an open, streamlined profile. The set includes two mobile storage pedestals finished in matte white, accented with thin brushed orange-brown integrated drawer handles and black plastic lock escutcheons, delivering a coordinated, professional neutral aesthetic with subtle warm detailing. Constructed for long-term commercial use, the worktop uses E1-grade particleboard with a matte melamine facing, built to a 50 mm finished thickness with a 40 mm composite load-bearing build-up where required. Support legs feature an 80 mm main section with 2 mm metal wall thickness, fitted with threaded leveling foot pads to compensate for minor floor unevenness. Each lockable mobile pedestal is built from 0.8 mm thick cold-rolled steel, riding on 30 mm diameter black nylon swivel casters, with full-extension side-mounted drawer slides rated for 50000 operation cycles. The set has a total net weight of 210 kg, with a total worktop static load capacity of 600 kg and a 150 kg uniformly distributed load reference for the top surface. For practical function, the MDF dividers block direct line of sight between opposite seated users to reduce cross-desk distraction, while a recessed gap under divider mounts accommodates built-in cable management, with 80 mm diameter cable openings and a 120 mm deep cable tray to route power and data cords neatly. Each seat position offers 680 mm high and 900 mm wide knee clearance, rated to support a maximum user weight of 120 kg. The two included mobile pedestals each have two drawers, with a key-locked top drawer to secure personal documents, and full-extension slides allow unobstructed access to full drawer contents. The freestanding assembled structure requires no permanent floor fixing, allowing easy repositioning as spatial needs shift. This workstation suits a range of settings, including open-plan corporate team zones, small startup offices in rented spaces that prohibit permanent modifications, government and institutional back offices, and co-working or training facilities supporting flexible hot-desking arrangements. It pairs optimally with height-adjustable mid-back mesh ergonomic office chairs to match the 750 mm worktop height. For procurement, note that each set ships across multiple cartons with a total packaged gross weight of 180 kg and 1 m³ total packaging volume, with a reference assembly time of 40 minutes per set. The melamine worktop surface has a recommended abrasion resistance acceptance of 2000 cycles, and drawer slides support a 45 kg load per pair, so selection teams should align these ratings with expected daily use intensity before purchase.

Four-Person Face-to-Face Open Office Workstation with Mobile Pedestals and Desk Dividers Specifications

供应商与现货