纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 1200 × 750 mm
Overall footprint	2400 x 1200 x 750 mm
Individual work surface depth per user	600 mm
Central desktop divider height	350 mm
Rear modesty/utility panel height	300 mm
Under-desk seated knee clearance height	673 mm
Cable management grommet diameter	60 mm
Side storage pedestal dimensions	400 x 600 x 654 mm
Steel support leg cross-section	50 x 50 mm
Worktop panel thickness	38 mm
Edge banding thickness	2 mm
Storage drawer internal depth	500 mm
Divider panel thickness	25 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total worktop static load capacity	235 kg
Drawer slide cycle rating	50000 open/close cycles
Recommended maximum user weight per seat	136 kg
Net workstation weight (assembled)	155 kg
Surface abrasion resistance rating	2000 cycles
Applicable user count	2
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop core and finish	E1-grade particleboard core, thermally fused melamine surface
Support frame and legs	Powder-coated cold-rolled steel, 1.5mm wall thickness
Edge banding	2mm thick PVC edge trim applied to all worktop perimeter edges
Central desktop divider	Medium-density fiberboard core, fabric-wrapped acoustic surface
Rear modesty panels	Powder-coated steel frame with laminated panel infill
Storage pedestal construction	18mm thick melamine-faced particleboard carcass, steel drawer slides
Drawer handles	Matte black ABS plastic pull handles fitted to each drawer front
Cable management components	ABS plastic grommet with brush insert, under-desk steel cable tray
Pedestal support glides	Nylon adjustable leveling glides on all pedestal base corners
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cable routing system	Dual desk-surface grommets feed cables to under-desk raceway for tidy cord management
Storage pedestal configuration	4 drawers (2 utility, 2 file-sized) with lockable core for secure document storage
Privacy divider function	Central desktop divider blocks direct line of sight between adjacent seated users
Modular connection design	Pre-drilled frame holes allow connection to additional matching workstations for cluster layouts
Leveling adjustment	Adjustable glides on legs and pedestal compensate for uneven floor surfaces up to 15mm
Rear panel utility	Raised rear panels conceal under-desk wiring and prevent items from falling off the back edge
Work surface layout	Split into two equal 1200mm wide work zones for individual user workspace
Drawer operation	Full-extension ball-bearing slides allow 100% drawer access for easy file retrieval
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office areas	Provides two dedicated work positions with privacy dividers for staff seating zones
Small team workspaces	Integrated storage reduces need for separate cabinets in compact office layouts
Startup and co-working spaces	Modular design allows reconfiguration as team size changes over time
Administrative department zones	Durable work surface and lockable storage support daily paperwork and file handling
Call center seating areas	Dividers reduce visual distraction for staff handling extended phone or computer tasks
Temporary project offices	Flat-pack design allows fast deployment and relocation between project sites

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applicable to structural performance verification
EN 527-2:2016	Office worktables dimensional safety and clearance requirements for seated use
EN 13722:2004	Office furniture storage units performance and safety requirements for the drawer pedestal

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance and safety standard for structural load and durability testing
ANSI/BIFMA X5.9-2019	Storage units performance standard for drawer slide and pedestal load testing
ANSI/BIFMA G1-2013	Ergonomic guideline for desk height and seated clearance dimensions

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to worktop and pedestal quality verification
GB/T 3325-2017	Metal furniture general technical requirements, applicable to steel frame and structural hardware
GB 18580-2017	Formaldehyde emission limits for wood-based panels, applicable to all composite board components
GB/T 4897.3-2003	Particleboard for furniture use, applicable to worktop and pedestal core material

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to worktop and pedestal quality verification；
2. GB/T 3325-2017：Metal furniture general technical requirements, applicable to steel frame and structural hardware；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, applicable to all composite board components；
4. GB/T 4897.3-2003：Particleboard for furniture use, applicable to worktop and pedestal core material；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-2P-SP-2400

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-2P-SP-2400

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-2P-SP-2400打开导出工具

页面快速操作

发布采购询价

产品描述

This two-person modular office workstation, model WS-2P-SP-2400, delivers a streamlined, functional workspace solution for commercial environments. Visually, it features a clean, modern profile split into two equal individual work zones, each with dedicated surface space. A 350mm tall fabric-wrapped central privacy divider sits between the two zones to block direct line of sight between adjacent seated users, while a 300mm tall rear modesty panel runs along the back edge to conceal under-desk wiring and prevent items from sliding off the rear of the surface. The integrated side storage pedestal sits flush to one end of the unit, with matte black ABS pull handles that complement the powder-coated steel frame for a cohesive, professional appearance. Constructed for high-traffic commercial use, the workstation’s worktop uses an E1-grade particleboard core with a thermally fused melamine surface, finished with 2mm thick PVC edge trim along all perimeter edges to resist impact damage. The frame and support legs are built from 1.5mm thick powder-coated cold-rolled steel with 50 x 50 mm cross-section, paired with nylon adjustable leveling glides on both legs and the storage pedestal to compensate for uneven floor surfaces. The central divider uses a medium-density fiberboard core with a fabric-wrapped acoustic surface, while the side pedestal features an 18mm thick melamine-faced particleboard carcass fitted with steel drawer slides rated for 50000 open/close cycles. Cable management components include 60mm diameter ABS grommets with brush inserts and an under-desk steel cable tray to route cords neatly out of view. Practically, the workstation supports two users with 673mm of under-desk seated knee clearance per position, with a total worktop static load capacity of 235kg, or 150kg when uniformly distributed. The integrated side storage pedestal holds four drawers: two utility-sized and two file-sized, fitted with a lockable core to secure sensitive documents. Pre-drilled frame holes allow seamless connection to additional matching workstations to build larger cluster layouts as needed. This unit is ideal for open-plan office staff seating zones, small team workspaces where separate storage cabinets would take up limited floor space, startup and co-working environments that require flexible reconfiguration as team sizes shift, administrative departments handling regular paperwork and file storage, call center seating where reduced visual distraction supports extended task focus, and temporary project offices where fast deployment and easy relocation are priorities. For procurement, note that each workstation is sold as one set, with a reference assembly time of 40 minutes per unit. The assembled net weight is 155kg, with a packaged gross weight of 180kg per set. The surface carries an abrasion resistance rating of 2000 cycles, with a recommended maximum user weight of 136kg per seat, making it suitable for continuous daily commercial use. Order additional matching units directly to build connected workstation clusters without additional modification parts.

Two-Person Modular Office Workstation with Side Storage Pedestal and Privacy Dividers Specifications

供应商与现货