| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2150 x 1830 x 960 mm | |
|---|---|---|
| mattress compatibility | 1800 x 2000 mm | |
| headboard panel height | 960 mm | |
| sleeping surface height | 350 mm | |
| under-bed clearance | 305 mm | |
| headboard panel thickness | 30 mm | |
| side rail thickness | 25 mm | |
| support leg cross-section | 80 x 80 mm | |
| slat thickness | 15 mm | |
| slat width | 60 mm | |
| slat gap spacing | 40 mm | |
| center support rail count | 1 | |
| center support leg count | 3 | |
| Slat Spacing | 80 mm |
Net weight / load capacity / users / durability
| net weight | 37 kg | |
|---|---|---|
| total static load capacity | 300 kg | |
| recommended mattress thickness | 220 mm | |
| slat system static load | 250 kg | |
| mattress slip resistance | Yes | |
| finish abrasion resistance | Grade 2 | |
| warranty period | 3 years | |
| available color options | 1 | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| headboard panel | Solid oak finger-jointed panel, natural matte clear lacquer | |
|---|---|---|
| bed side rails | Solid oak frame, same finish as headboard | |
| support legs | Solid oak block legs, squared profile, floor-protecting felt pads | |
| support slats | Solid pine or oak wood slats, sanded smooth, unfinished | |
| center support beam | Solid wood longitudinal beam, metal screw connected to side rails | |
| connecting hardware | Zinc-plated steel bolts, barrel nuts, and pre-drilled assembly points | |
| surface finish | Water-based matte clear lacquer, low VOC, natural wood tone | |
| floor protection pads | Felt pads affixed to bottom of all legs to prevent floor scratching | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| box spring requirement | No box spring required | |
|---|---|---|
| assembly requirement | Knockdown assembly required, included hex key and hardware | |
| under-bed storage access | Full open access on all four sides between support legs | |
| headboard mounting | Pre-drilled bolt-on headboard fixed directly to side rail ends | |
| mattress retention | Raised 20mm lip along side and head rails | |
| structural stability | Three additional center support legs eliminate frame flex | |
| noise reduction | Pre-installed buffer pads between slats and frame rails | |
| compatibility | Fits standard 1800x2000mm mattresses without custom sizing | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| residential master bedroom | Suitable for 18sqm modern or Nordic style master bedrooms | |
|---|---|---|
| guest bedroom furnishing | Durable solid wood construction suitable for frequent guest use | |
| apartment and small space use | Open under-bed clearance adds functional storage without extra furniture | |
| matching furniture sets | Pairs with matching light oak nightstands and dressers for coordinated bedroom sets | |
| mattress showroom display | Neutral natural wood finish showcases mattress products without visual distraction | |
| rental property furnishing | Sturdy solid wood construction withstands repeated assembly and tenant use |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements, applicable for structural strength | |
|---|---|---|
| EN 747-1:2012 | Furniture - Beds and mattresses - Test methods for strength and durability | |
| EN 12521:2015 | Furniture - Strength, durability and safety requirements for domestic seating and beds |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, applicable for formaldehyde emission | |
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture finishes, applicable for lacquer durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety; 2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable for formaldehyde emission; 3. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, applicable for lacquer durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
