| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1890 x 2160 x 1030 mm | |
|---|---|---|
| compatible mattress size | 1800 x 2000 mm | |
| sleeping surface height | 460 mm | |
| headboard shelf depth | 150 mm | |
| headboard total height | 1030 mm | |
| footboard height | 310 mm | |
| footboard open slot height | 200 mm | |
| under-bed floor clearance | 20 mm | |
| slat width | 70 mm | |
| slat spacing | 75 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| total static load capacity | 272 kg | |
|---|---|---|
| bed frame net weight | 114 kg | |
| recommended mattress thickness | 254 mm | |
| expected service life | 10 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| headboard panel | Solid rubberwood, 25mm thick, rounded edges, matte clear finish | |
|---|---|---|
| side/foot rails | Solid rubberwood, 30mm thick, rounded corners, matching finish | |
| support slats | Solid pine plywood, 18mm thick, sanded smooth | |
| center support rail | Solid hardwood, 40mm thick, runs full length of bed | |
| support legs | Solid wood tapered legs, 50mm diameter, floor-protective pads | |
| hardware connectors | Zinc-plated steel bolts, dowels, and cam locks | |
| surface finish | Low-VOC matte clear lacquer, 0.1mm coating thickness | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| headboard storage shelf | Continuous recessed top shelf along full headboard width for books, clocks, small decor | |
|---|---|---|
| footboard book slots | Two open recessed slots in footboard panel for vertical book/magazine storage | |
| slat support system | 14 slats spaced 75mm apart with 1 center support rail, no box spring required | |
| rounded edge safety design | All exposed frame corners rounded to 10mm radius to prevent impact injury | |
| floor protection | All support legs fitted with non-marking felt pads to prevent floor scratching | |
| flat-pack assembly | Ships disassembled with all hardware and hex key included for two-person assembly | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| primary use space | Residential master or guest bedrooms, for adult double sleeping | |
|---|---|---|
| target user | Users preferring nordic/minimalist style, needing bedside open storage | |
| recommended configuration | Pair with matching 1-drawer open-shelf nightstands on both sides | |
| mattress compatibility | Works with memory foam, latex, or spring mattresses up to 254mm thick | |
| style suitability | Fits scandinavian, modern minimalist, and japanese-inspired interior designs | |
| installation note | Requires 100mm clearance from wall to access headboard shelf fully |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating (applicable for edge safety) |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional stability and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional stability and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
