| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1500 x 800 x 760 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total table weight | 32 kg | |
|---|---|---|
| Tabletop static load capacity | 100 kg | |
| Recommended seating capacity | 6 | |
| Surface abrasion resistance (finish) | 1000 cycles | |
| Recommended warranty period | 2 years | |
| Seating capacity per side | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Solid rubberwood panel with natural matte clear lacquer finish | |
|---|---|---|
| Support apron | Solid rubberwood rail secured to tabletop underside with mortise and tenon joinery | |
| Table legs | Tapered solid rubberwood with smooth sanded finish matching tabletop | |
| Joinery hardware | Zinc-plated steel corner brackets and wood screws | |
| Surface finish | Low-VOC water-based clear lacquer with 0.1mm coating thickness | |
| Foot pads | Non-slip PE plastic pads affixed to leg bases | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Assembly method | Knockdown assembly with legs attached via inserted bolts to pre-installed apron inserts | |
|---|---|---|
| Surface performance | Smooth sealed surface resistant to daily water spills and hot tableware up to 80°C | |
| Floor protection | Replaceable plastic foot pads that prevent scratches on hard wood and tile floors | |
| Seating flexibility | Fits up to 6 dining chairs with sufficient leg clearance on all four sides | |
| Stability performance | Four-leg outboard placement provides tip resistance when 20kg load is applied to table edge | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 6person household daily dining, matches Scandinavian and minimalist interior styles | |
|---|---|---|
| Small apartment open plan kitchen | Compact 800mm depth fits narrow dining areas without blocking walkways | |
| Casual office break room | Durable solid wood surface supports staff meal and casual meeting use | |
| Small cafe seating area | Natural wood finish creates warm atmosphere for light food and beverage service | |
| Studio apartment workspace | 760mm standard height pairs with dining or task chairs for dual-use work and dining |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance validation |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in interior decoration wooden furniture, applicable for formaldehyde emission verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality inspection; 2. GB 18584-2001: Limit of harmful substances in interior decoration wooden furniture, applicable for formaldehyde emission verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
