| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 800 x 760 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Under-table knee clearance height | 680 mm | |
| Leg top diameter (table attachment) | 60 mm | |
| Leg bottom diameter (floor contact) | 45 mm | |
| Apron height | 55 mm | |
| Corner radius (tabletop) | 40 mm | |
| Leg position offset from corners | 80 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load capacity | 180 kg | |
|---|---|---|
| Product net weight | 33 kg | |
| Surface abrasion resistance (finish) | 400 cycles | |
| Wood moisture content (production standard) | 10% | |
| Maximum weight per leg static load | 70 kg | |
| Hardware joint torque resistance | 12 Nm | |
| Seating capacity per long side | 2 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | Kiln-dried solid natural oak wood | |
|---|---|---|
| Tabletop finish | Clear matte natural oil coating | |
| Table legs | Solid oak tapered cylindrical wood pieces | |
| Structural apron | Solid oak matching wood frame | |
| Internal bracing | Powder-coated steel transverse cross braces | |
| Assembly fasteners | Zinc-plated steel bolt and cam lock hardware | |
| Floor contact pads | Felt non-slip protective pads | |
| Finish coating thickness | 0.1 mm | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating support | Accommodates 4 diners with unobstructed leg room on all four sides | |
|---|---|---|
| Safety edge design | Soft rounded corners reduce impact injury risk | |
| Knock-down assembly | Flat-packed for transport, assembled with included hex key | |
| Surface maintenance | Oiled finish can be spot cleaned and re-oiled for long-term use | |
| Floor protection | Felt leg pads prevent scuffing on hard flooring and rugs | |
| Level adjustment | Small adjustable glides compensate for minor uneven floor surfaces | |
| Stability design | Wide leg stance resists tipping when loaded with tableware and meals | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining rooms | Fits compact 4-person households with 1200mm length for small dining spaces | |
|---|---|---|
| Apartment kitchen nooks | Scaled appropriately for limited-space open-plan kitchen dining areas | |
| Casual home breakfast areas | Standard dining height suitable for daily meals and casual dining use | |
| Small office break rooms | Neutral light wood finish fits modern office pantry break areas for 4 staff | |
| Studio living spaces | Minimalist Nordic design complements light, neutral small-space interiors | |
| Vacation rental dining areas | Durable solid wood construction suitable for short-term rental frequent use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables, applicable for performance verification | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface finishes of furniture, applicable for finish durability testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances in wooden furniture, applicable for formaldehyde testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural checks; 2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances in wooden furniture, applicable for formaldehyde testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
