| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 350 x 450 mm | |
|---|---|---|
| Seat height | 450 mm | |
| Seat plank thickness | 50 mm | |
| Leg top cross-section | 50 x 50 mm | |
| Leg bottom cross-section | 35 x 35 mm | |
| Apron height | 80 mm | |
| Under-seat floor clearance | 370 mm | |
| Corner radius | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total static load capacity | 180 kg | |
|---|---|---|
| Seating capacity | 2 adults | |
| Product net weight | 14 kg | |
| Finish abrasion resistance | 10000 cycles | |
| Wood moisture content | 10% | |
| Warranty period | 2 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat plank | Solid hardwood with matte clear natural finish | |
|---|---|---|
| Legs | Solid tapered hardwood with curved apron cutaway detail | |
| Apron support rail | Solid hardwood, mortise and tenon reinforced with bolted joints | |
| Surface coating | Water-based urethane clear coat, smooth non-glare texture | |
| Connection hardware | Zinc-plated steel bolts and lock nuts | |
| Foot pads | Non-slip PE felt pads, 5 mm thick | |
| Edge treatment | Sanded and rounded smooth edges, no sharp corners | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating use | Supports seated shoe changing, temporary resting, or bed-end placement | |
|---|---|---|
| Floor protection | Felt foot pads prevent scratches on hard flooring and rugs | |
| Assembly requirement | Knockdown assembly with included hex key and hardware | |
| Placement flexibility | Fits narrow entryways, hallways, bedroom foot of bed, or dining side use | |
| Surface stability | Flat even seat surface supports placement of books, throws, or small decor items | |
| Maintenance | Wipe-clean sealed wood surface resists minor spills and daily wear | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential entryway | Slim profile fits narrow hallways for shoe changing and temporary seating | |
|---|---|---|
| Bedroom bed-end placement | Low height aligns with standard bed frames for throw and linen storage seating | |
| Small dining nook | Armless backless design works as compact supplementary dining seating | |
| Living room accent seating | Minimalist design complements Scandinavian and mid-century modern living room decor | |
| Walk-in closet | Narrow depth fits closet walkways for seating while dressing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety for domestic seating, applicable for load and stability verification | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Safety of toys migration of certain elements, applicable if used in family spaces with children |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, required for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality checks; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, required for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
