| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2900 x 1100 x 970 mm | |
|---|---|---|
| Seat height from floor | 470 mm | |
| Single seat width | 680 mm | |
| Seat depth (front to back) | 580 mm | |
| Support leg height | 165 mm | |
| Armrest height above seat | 200 mm | |
| Backrest height above seat | 500 mm | |
| Armrest width at top | 120 mm | |
| Lower under-seat clearance | 120 mm | |
| Seat cushion thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 450 kg | |
|---|---|---|
| Individual per-seat weight rating | 110 kg | |
| Upholstery fabric abrasion resistance | 30000 Martindale cycles | |
| Fabric lightfastness rating | Grade 5 (8scale) | |
| Sofa net weight | 90 kg | |
| Cushion foam density (seat) | 35 kg/m³ | |
| Cushion foam density (back) | 20 kg/m³ | |
| Foam rebound rate | 60% | |
| Seat support spring core count | 12 pocket springs per seat | |
| Structural frame warranty | 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal structural frame | Kiln-dried solid eucalyptus wood with plywood reinforcement | |
|---|---|---|
| Outer frame trim and armrests | Warm-toned solid wood veneer or solid wood with matte finish | |
| Support legs | Matte black powder-coated carbon steel, 20mm diameter tube | |
| Seat cushion core | 35kg/m³ high-resilience PU foam wrapped in 20mm polyester fiber wadding | |
| Back cushion core | 20kg/m³ soft PU foam with loose polyester fiber fill | |
| Primary upholstery fabric | 350gsm linen-look woven polyester blend | |
| Throw pillows | Woven geometric polyester, velvet, and solid match-fabric covers | |
| Seat support system | 4mm sinuous spring base with 50mm elastic webbing reinforcement | |
| Joinery hardware | Zinc-plated steel corner brackets and wood screws | |
| Seam stitching | High-tenacity polyester thread, 30mm seam pitch on cushion edges | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Seating capacity | 3 individual adult seating positions | |
|---|---|---|
| Cushion design | Loose removable seat and back cushions for easy cleaning | |
| Assembly method | Knock-down construction requiring leg and arm attachment on site | |
| Armrest design | Outward-angled padded wood-trimmed armrests for elbow support | |
| Footing stability | 6 metal support legs (2 at each end, 2 at center) for weight distribution | |
| Cover design | Zippered removable cushion covers for spot cleaning or replacement | |
| Back support angle | 105 degree fixed reclined angle for relaxed lounge seating | |
| Surface protection | Non-marking plastic glides on metal leg bases to prevent floor scratches | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room | Primary lounge seating placed opposite media units for daily relaxation and guest use | |
|---|---|---|
| Small open-plan apartment | Low-profile linear design fits compact spaces without blocking sightlines | |
| Modern office reception area | Neutral beige finish and clean silhouette suit contemporary commercial lounge spaces | |
| Studio lounge space | Pairs with nested coffee tables (as shown) for casual guest waiting areas | |
| Recommended pairing | Match with low-profile marble-top round coffee tables for a cohesive minimalist look | |
| Target user group | Design-focused residential homeowners and small commercial space operators | |
| Placement clearance requirement | Maintain 300mm clearance behind backrest for wall protection and air circulation |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Strength, durability and safety requirements for residential seating furniture | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance for cigarette source |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood frame components | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture interior decoration materials | |
| GB/T 1952.1-2012 | Strength, durability and stability requirements for upholstered sofas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame components; 2. GB 18584-2001: Limit of harmful substances in wooden furniture interior decoration materials; 3. GB/T 1952.1-2012: Strength, durability and stability requirements for upholstered sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
