| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set dimensions (larger table) | 900 x 900 x 450 mm | |
|---|---|---|
| Smaller nested table dimensions | 700 x 700 x 400 mm | |
| Tabletop thickness | 9 mm | |
| Base ring tube diameter | 20 mm | |
| Large table base ring diameter | 780 mm | |
| Small table base ring diameter | 600 mm | |
| Floor clearance under larger table | 120 mm | |
| Nested footprint depth when stowed | 1000 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table static distributed load | 91 kg | |
|---|---|---|
| Small table static distributed load | 50 kg | |
| Total set net weight | 25 kg | |
| Base finish corrosion resistance (indoor use) | 500 hours salt spray resistance | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Recommended maximum number of users | 6 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Larger table tabletop | 9mm white smooth hard surface (sintered stone/MDF) | |
|---|---|---|
| Smaller table tabletop | 9mm white smooth hard surface (sintered stone/MDF) | |
| Metal support frames | 1.2mm thick carbon steel with matte black powder coating | |
| Tabletop edge finish | Smooth polished beveled edge | |
| Base floor contact pads | 8mm thick non-slip silicone pads | |
| Assembly hardware | M6 zinc-plated steel screws and lock washers | |
| Base welding joints | Full TIG welded ground smooth joints | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides fully under large table to 60% overlap | |
|---|---|---|
| Assembly requirement | Knock-down assembly with included hex key, no special tools required | |
| Surface use function | Smooth non-porous top supports drinks, decor, and light reading materials | |
| Floor protection function | Silicone contact pads prevent scuffs on hard floors and carpet indentation | |
| Stability design | Circular ring base distributes weight evenly to prevent tipping on level surfaces | |
| Cleaning function | Water-resistant smooth surface wipes clean with soft damp cloth | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Residential living room center, positioned in front of sofa seating groups | |
|---|---|---|
| Secondary application space | Small apartment lounge, studio open plan, or hotel reception waiting areas | |
| Recommended style match | Contemporary, minimalist, light luxury, or modern neutral interior schemes | |
| Use case limitation | Indoor dry environment only, not suitable for outdoor wet or high-heat exposed locations | |
| Recommended complementary furniture | Low-pile carpet, modular fabric sofas, and minimalist floor lamps |
EU Market Access Requirements* EN Standards
| Domestic furniture safety | EN 12521:2015 | |
|---|---|---|
| Surface furniture stability | EN 1730:2012 |
Standards applicable to China-market projects
| Table mechanical safety | GB/T 3324 | |
|---|---|---|
| Formaldehyde emission limit | GB 18584 | |
| Metal furniture coating | GB/T 3325 |
This product must meet the following technical requirements: 1. Table mechanical safety: GB/T 3324; 2. Formaldehyde emission limit: GB 18584; 3. Metal furniture coating: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
