| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1600 x 600 x 2000 mm | |
|---|---|---|
| left long hanging zone internal width | 500 mm | |
| right tall hanging zone internal width | 700 mm | |
| central open shelf column width | 300 mm | |
| long hanging zone internal height | 1400 mm | |
| short hanging zone internal height | 900 mm | |
| lower short hanging zone under drawer height | 700 mm | |
| central drawer internal dimensions | 700 x 400 x 120 mm | |
| shelf compartment internal dimensions | 300 x 300 mm | |
| upper bulk storage shelf dimensions | 500 x 400 x 300 mm | |
| carcass panel thickness | 18 mm | |
| base leg height | 100 mm | |
| back panel thickness | 5 mm | |
| edge band thickness | 1 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| unit net weight | 75 kg | |
|---|---|---|
| hanging rod static load capacity | 30 kg per rod | |
| total clothing storage capacity | 80 hangers plus 4 shelf compartments and 1 drawer | |
| surface scratch resistance | 2000 abrasion cycles | |
| anti-tip hardware load rating | 50 kg pull resistance | |
| hinge and slide cycle rating | 50000 open/close cycles | |
| drawer slide load rating | 25 kg per pair | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| main carcass | 18mm thick engineered particleboard with natural light oak melamine foil finish | |
|---|---|---|
| back panel | 5mm thick hardboard with matching light wood finish | |
| hanging rods | 25mm diameter powder-coated steel with matte silver finish | |
| central drawer front | 18mm thick matching engineered wood with recessed metal pull handle | |
| shelf surfaces | 18mm thick matching engineered wood with 1mm PVC edge banding | |
| base legs | Solid rubberwood with natural clear coat finish | |
| drawer slides | Cold-rolled steel side-mounted ball-bearing slides | |
| edge banding | 1mm thick PVC in matching wood tone | |
| anti-tip hardware | Zinc-plated steel wall anchor brackets and screws | |
| drawer internal base | 12mm thick high-density fiberboard | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| dual separate hanging zones | Left full-height zone for long garments, right split zone for short tops and lower trousers | |
|---|---|---|
| four central open shelves | Fixed horizontal shelves in middle column for folded clothes, cushions or accessories | |
| central soft-close drawer | Single full-width drawer between right hanging sections for small clothing items | |
| upper bulk storage shelf | Top-left enclosed open shelf for folded bedding, linens or out-of-season items | |
| wall anti-tip anchoring | Included hardware secures top rear of unit to wall studs | |
| no door access | Completely open front design without hinged or sliding doors | |
| modular shelf adjustment | Pre-drilled pin holes allow 32mm incremental height adjustment of central shelves | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| residential bedroom | Primary clothing storage for studio, apartment or master bedroom open closet layouts | |
|---|---|---|
| rental property furnishing | Freestanding installation without wall modification required (anchoring recommended) | |
| boutique retail display | Open front design displays garments and accessories for clothing store visual merchandising | |
| entryway dressing zone | Placed near entry for outerwear, bags and daily outfit storage | |
| small apartment storage | Compact 1600mm width fits narrow bedroom spaces without occupying excess floor area | |
| dormitory or shared housing | Dual hanging zones divide storage space for 2 users sharing a bedroom |
EU Market Access Requirements* EN Standards
| EN 14073-2:2004 | Storage furniture for office and domestic use, safety and strength requirements for freestanding units | |
|---|---|---|
| EN 12221-1:2005+A1:2013 | Furniture for clothing storage, functional and structural performance test methods |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Limit of formaldehyde emission for indoor wooden furniture, mandatory for indoor air safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural quality checks; 2. GB 18584-2001: Limit of formaldehyde emission for indoor wooden furniture, mandatory for indoor air safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
