| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended user capacity | 2 adults | |
|---|---|---|
| Bed frame static load capacity | 350 kg | |
| Slat support point capacity | 35 kg per slat | |
| Recommended mattress weight | 45 kg | |
| Recommended mattress thickness | 240 mm | |
| Frame net weight | 65 kg | |
| Floor contact points | 4 legs | |
| Recommended wall clearance | 50 mm | |
| Durability target | 10 years residential use | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Woven polyester-blend bouclé-style fabric over padded panel | |
|---|---|---|
| Headboard padding | 30 mm polyurethane foam with soft fiber overlay | |
| Headboard core | Kiln-dried timber or engineered-wood panel frame | |
| Side and foot rails | Fabric-wrapped engineered-wood rails with integrated edge upholstery | |
| Platform support base | Raised wooden slat system or ventilated board base on center rails | |
| Support legs | Black powder-coated cylindrical steel legs | |
| Rail fastening hardware | Bolted steel corner brackets and barrel nuts | |
| Mattress retention detail | Internal raised slat retainer inside upholstered rails | |
| Underside protective pads | Polypropylene or felt floor-protecting foot pads | |
| Seam construction | Tailored edge stitching around rounded headboard and rail corners | |
| Upholstery foam back layer | 20 mm resilient foam on side rails | |
| Internal support beam | Central wooden beam with supplementary support foot |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Queen-size double sleeping platform designed for one 1800 x 2000 mm mattress | |
|---|---|---|
| Head support | Rounded padded headboard provides upright back support for reading and seated conversation | |
| Mattress location | Recessed platform design holds the mattress inside upholstered rails, reducing lateral movement | |
| Low-profile access | 560 mm sleeping surface allows easy entry while preserving the modern low bed appearance | |
| Under-bed ventilation | 120 mm floor clearance permits air movement and limited cleaning access beneath the rails | |
| Assembly method | Knock-down headboard, side rails, foot rail, slat deck, and four legs bolt together on site | |
| Cleaning access | Open corners and 120 mm clearance support robotic or manual vacuum cleaning under the frame | |
| Bed placement | Designed for wall placement with the full-width headboard against a finished wall | |
| Bedding retention | Low upholstered foot and side borders contain duvets while keeping the mattress visually exposed | |
| Floor protection recommendation | Use fitted felt pads under each steel foot to reduce abrasion on timber flooring | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a compact or spacious residential bedroom where a soft rounded headboard and low bed create a calm setting | |
|---|---|---|
| Guest bedroom | Provides two-adult sleeping capacity with a neutral warm-gray finish suitable for mixed interior schemes | |
| Modern apartment fit-out | Fits minimalist, Japandi, or contemporary rooms with light timber floors and neutral walls | |
| Boutique hotel room | Suitable for upscale rooms requiring a soft headboard, durable upholstery, and easy replacement bedding layout | |
| Bedroom with bedside storage | Pairs with compact round nightstands or low cabinets on either side of the headboard | |
| Hard-floor installation | Recommended with protective pads on timber, laminate, or tile floors because four discrete metal legs concentrate load | |
| Upholstered bed display | Appropriate for furniture showroom vignettes featuring bedding, curtains, soft lighting, and warm neutral finishes |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
