| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Bed frame recommended static load | 350 kg | |
|---|---|---|
| Mattress support distributed load | 250 kg | |
| Number of occupants | 2 adults | |
| Headboard leaning load | 100 kg | |
| Frame net weight range | 55 kg | |
| Leg point load capacity | 60 kg per leg | |
| Slat spacing | 70 mm | |
| Expected residential service life | 8 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard padding | High-resilience polyurethane foam over rigid panel, covered in soft woven upholstery | |
|---|---|---|
| Headboard substrate | Plywood or engineered-wood support panel with 18 mm thickness | |
| Upholstery fabric | Light ivory woven fabric or performance velvet, 0.8 mm face thickness | |
| Side and foot rails | Engineered-wood frame wrapped in matching ivory upholstery | |
| Internal support frame | Kiln-dried timber and plywood rails with 30 x 60 mm section | |
| Bed slats | 12 mm thick bentwood or plywood slats in a slat roll | |
| Support legs | Six tapered legs with light oak-colored wood or veneered metal finish | |
| Leg fitting | M8 threaded insert or hanger-bolt attachment with steel mounting plate | |
| Rail joint hardware | Cam-lock nuts, wood dowels, and steel corner brackets | |
| Edge treatment | Softly rounded upholstered edges with concealed stapling and taped seams | |
| Cushioning density | 35 kg/m3 headboard foam and 25 kg/m3 rail foam | |
| Slat Thickness | 15 mm bent plywood or solid timber |
Adjustment / rotation / tilt / mobility / storage features
| Headboard design | Two independent curved padded panels form a split arched backrest with a center seam | |
|---|---|---|
| Mattress platform | Low-profile upholstered frame supports the mattress on wooden slats without a box spring | |
| Under-bed access | 150 mm floor clearance allows robot vacuum and floor-cleaning access beneath the side rails | |
| Bed entry | Three-side access from left, right, and foot with centered wall placement against the headboard | |
| Assembly method | Knock-down headboard, side rails, foot rail, slat roll, and legs join with threaded fittings and brackets | |
| Stability system | Six-leg layout includes two center supports to reduce rail deflection across the 1800 mm width | |
| Mattress retention | Upholstered 380 mm side and foot rails contain the mattress and reduce lateral movement | |
| Ventilation | Open slatted platform allows air circulation under the mattress | |
| Storage configuration | No drawers, lift mechanism, or hydraulic storage compartment visible | |
| Headboard installation | Split headboard panels mount to rear rail brackets and sit flush when installed | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Packed carton count | 4 cartons | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a 1800 x 2000 mm king mattress in a modern residential master bedroom | |
|---|---|---|
| Boutique hotel room | Warm ivory upholstery and soft arched panels fit upscale hotel or serviced-apartment interiors | |
| Neutral modern interior | Pairs with grey wall finishes, light wood floors, rugs, and simple bedside cabinets | |
| Low-profile bed layout | Suitable where a clean floating appearance and robot-vacuum access are required | |
| Pairing furniture | Coordinates with 550 mm wide two-drawer nightstands placed beside the headboard | |
| Two-person daily use | Appropriate for adult couples requiring 1800 mm shoulder width and independent padded backrest sections |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
