| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended user capacity | 2 adults | |
|---|---|---|
| Static bed-frame load rating | 350 kg | |
| Recommended mattress thickness | 240 mm | |
| Mattress minimum thickness | 200 mm | |
| Mattress maximum thickness | 300 mm | |
| Headboard lean-back static load | 120 kg | |
| Platform point-load rating | 80 kg per support zone | |
| Bed frame net weight | 68 kg | |
| Color availability target | 1 standard cream-white color | |
| Warranty target | 36 months |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Cream white woven or velvet-like soft fabric over padded panels | |
|---|---|---|
| Side and foot upholstery | Matching cream white fabric with gathered lower edge | |
| Headboard cushioning | High-resilience polyurethane foam with soft fiber top layer | |
| Cushion foam thickness | 80 mm headboard padding | |
| Foam density target | 35 kg/m3 headboard foam | |
| Internal frame | Kiln-dried solid timber and engineered timber composite frame | |
| Frame timber section | 40 x 60 mm primary support rails | |
| Mattress support base | Plywood board or closely spaced timber slats with center rail | |
| Support board or slat thickness | 18 mm plywood or 25 mm timber slats | |
| Feet and floor protection | Low black polymer or powder-coated metal feet with non-marking pads | |
| Joinery hardware | Powder-coated steel corner brackets, bolts and cam connectors | |
| Fabric surface weight target | 320 g/m2 |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Fixed queen-size double bed platform for two-adult use | |
|---|---|---|
| Headboard support | Four vertically segmented padded zones provide backrest and pillow retention | |
| Platform support | Mattress rests directly on a fixed low platform deck or close-slatted support | |
| Under-bed storage | No drawers or lift-up storage compartment are present | |
| Bedding retention | Padded side and foot rails contain the mattress and reduce lateral movement | |
| Assembly method | Knock-down headboard, side rails, foot rail and support deck join with concealed bolts | |
| Floor installation | Freestanding placement on level bedroom flooring with no wall fixing shown | |
| Cleaning access | 20 mm under-bed clearance permits light floor cleaning but not storage box access | |
| Mattress retention height | 120 mm effective rail containment above deck | |
| Headboard cable management | No integrated power socket, reading light or cable outlet is visible | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Master bedroom | Suits a residential master bedroom where a soft cream bed anchors a calm neutral interior | |
|---|---|---|
| Boutique hotel guest room | Appropriate for upscale boutique rooms requiring padded headboard comfort and low modern profile | |
| Apartment furnishing package | Suitable for serviced apartments seeking one neutral upholstered bed with no separate box spring | |
| Soft contemporary interior | Pairs with oak-look flooring, plaster tones, arched windows and rounded lighting | |
| Reading in bed | Padded full-width headboard supports seated reading with separate sleeping pillows | |
| Low-ceiling bedroom | Low 240 mm platform base creates a relaxed floor-near profile without a tall storage bulk | |
| Carpeted or wood flooring | Low non-marking feet suit wood, laminate or carpet with load-distribution pads |
EU Market Access Requirements* EN Standards
| Furniture mechanical safety | EN 1725:1998 | |
|---|---|---|
| Bed durability testing | EN 1957:2012 | |
| Upholstered furniture safety | EN 1021:2014 |
Standards applicable to China-market projects
| Timber structure safety | GB/T 3324 | |
|---|---|---|
| Upholstered furniture safety | GB/T 36407 | |
| Fabric colorfastness | GB/T 3920 | |
| Formaldehyde emission | GB 18584 | |
| Furniture labeling | GB/T 16799 |
This product must meet the following technical requirements: 1. Timber structure safety: GB/T 3324; 2. Upholstered furniture safety: GB/T 36407; 3. Fabric colorfastness: GB/T 3920; 4. Formaldehyde emission: GB 18584; 5. Furniture labeling: GB/T 16799; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
