| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Bed frame recommended load | 350 kg | |
|---|---|---|
| Static point load on slat system | 90 kg | |
| Mattress weight capacity | 60 kg | |
| Number of sleepers | 2 | |
| Slat count | 14 slats | |
| Slat spacing | 120 mm | |
| Net weight | 68 kg | |
| Nightstand top load | 25 kg | |
| Nightstand drawer load | 10 kg | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard outer upholstery | Woven polyester fabric over padded panels | |
|---|---|---|
| Headboard padding | High-resilience polyurethane foam with fiber topper | |
| Headboard inner frame | Engineered wood board and solid wood bracing, 25 mm nominal thickness | |
| Side and foot rails | Fabric-covered engineered wood rails with padded outer face | |
| Bed base panel | Plywood or MDF supporting frame, 18 mm nominal thickness | |
| Slat system | Solid wood or plywood slats, 55 mm wide and 12 mm thick | |
| Support legs | Black powder-coated steel, 25 mm nominal section | |
| Leg foot pads | Injected plastic floor-protecting pads, 5 mm thickness | |
| Tufting hardware | Recessed fabric-covered buttons or stitched tufting points, 12 positions | |
| Nightstand body | Fabric-wrapped engineered wood case with one drawer | |
| Nightstand legs | Black matte metal rod legs, 16 mm diameter | |
| Drawer pull | Vertical black metal handle, 90 mm length |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Supports one 1800 x 2000 mm king mattress with perimeter retention | |
|---|---|---|
| Headboard support | Padded two-row tufted backrest provides upright sitting support for reading | |
| Mattress ventilation | 14-slat open base creates airflow under the mattress | |
| Under-bed access | 120 mm clearance permits flat cleaning robots and periodic floor cleaning | |
| Bed entry | Three-sided low-platform entry with 550 mm sleeping surface height | |
| Assembly method | Bolt-on headboard, side rails, foot rail, slat roll and four legs | |
| Floor protection | Plastic pads on steel legs isolate hard floors and reduce localized pressure | |
| Nightstand storage | One full-width soft-close-ready drawer for bedside accessories | |
| Fixed positioning | Non-rolling bed with four feet contacting the floor | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total packed volume | 0.92 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Designed for a king-size bed in a modern residential bedroom | |
|---|---|---|
| Hotel guest room | Suitable for upscale hotel rooms when fabric fire ratings and commercial durability are specified | |
| Serviced apartment | Fits furnished long-stay apartments requiring a complete sleeping focal point | |
| Bedside storage configuration | Pair with one or two matching 520 mm-wide nightstands for lamps and personal items | |
| Hard-floor installation | Appropriate for tile, concrete, wood or laminate floors with protective foot pads | |
| Compact circulation layout | Use in a room at least 3200 mm wide for side access and bed-making clearance | |
| Upholstered accent setting | Pairs with soft rugs, warm wall panels and relaxed lounge lighting |
EU Market Access Requirements* EN Standards
| EN 1725:1998 suitability | Use safety, strength and durability requirements for domestic beds | |
|---|---|---|
| EN 1021-1 suitability | Assess cigarette ignition resistance of upholstered furniture when flame-retardant use is required | |
| EN 717-1 suitability | Use formaldehyde release chamber testing for wood-based panels | |
| EN 16139:2013 suitability | Reference non-domestic seating strength only if bench-style use is added |
Standards applicable to China-market projects
| GB/T 3324-2024 suitability | Apply dimensional inspection, material and workmanship requirements for wooden furniture | |
|---|---|---|
| GB/T 3325-2017 suitability | Use metal furniture inspection requirements for steel legs and welded hardware | |
| GB 18580-2017 suitability | Require formaldehyde emission limits for engineered-wood boards | |
| GB/T 10357.6-2013 suitability | Use bed strength and durability test methods for residential frame validation | |
| GB 20286-2006 suitability | Applicable standards and test results require confirmation |
This product must meet the following technical requirements: 1. GB/T 3324-2024 suitability: Apply dimensional inspection, material and workmanship requirements for wooden furniture; 2. GB/T 3325-2017 suitability: Use metal furniture inspection requirements for steel legs and welded hardware; 3. GB 18580-2017 suitability: Require formaldehyde emission limits for engineered-wood boards; 4. GB/T 10357.6-2013 suitability: Use bed strength and durability test methods for residential frame validation; 5. GB 20286-2006 suitability: Applicable standards and test results require confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
