| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Bed frame net weight | 68 kg | |
|---|---|---|
| Recommended mattress weight | 55 kg | |
| Static load capacity | 450 kg | |
| Recommended user weight per occupant | 150 kg | |
| Sleeping capacity | 2 adults | |
| Slat spacing for mattress support | 70 mm | |
| Leg count | 6 legs | |
| Color options represented | 1 grey upholstered finish visible | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Grey velvet-feel woven fabric with visible vertical channel tufting | |
|---|---|---|
| Headboard padding | High-loft fiber and foam-wrapped cushion with rounded rolled edges | |
| Side and foot rails | Fabric-upholstered padded panels over structural framing | |
| Internal support frame | Timber or engineered-wood rail frame with steel reinforcement brackets | |
| Mattress support base | Flat board or closely spaced slat deck suited to a 1800 x 2000 mm mattress | |
| Support legs | Black powder-coated cylindrical metal legs | |
| Channel seams | Vertical stitched fabric channels around headboard, side rails, and foot rail | |
| Fabric surface weight | 320 g/m2 | |
| Backing fabric layer | Woven polyester backing beneath upholstery for seam stability | |
| Foot caps | Non-marking polymer glide caps on metal legs | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Low-profile platform design | 320 mm deck height places the mattress inside padded rails for a modern bedroom look | |
|---|---|---|
| Mattress retention | Raised 160 mm upholstered side and foot surrounds limit lateral mattress movement | |
| Headboard support | Full-width 950 mm padded headboard provides seated back support when reading | |
| Channel-tufted surface | Vertical segmented padding creates separate soft facets without button hardware | |
| Under-bed ventilation | 80 mm open perimeter gap permits air circulation and floor cleaning | |
| Floor contact | Six black metal legs transfer loads through discreet feet without a bulky box base | |
| Assembly method | Bolt-on headboard, side rails, foot rail, support beams, and leg plates for flat-pack delivery | |
| Bedding compatibility | Designed for one 1800 x 2000 mm mattress; no box spring required | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total gross weight | 78 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Master bedroom | Suits a 1800 x 2000 mm king mattress for two adults in a modern residential room | |
|---|---|---|
| Boutique hotel room | Soft grey surround and full headboard provide a contemporary upholstered bed appearance for guest rooms | |
| Apartment or condominium fit-out | Flat-pack three-carton construction supports repeated residential installation and replacement | |
| Bed showroom display | Channel-tufted grey frame pairs with white bedding and a contrasting runner for visual merchandising | |
| Hard-floor bedroom | Polymer foot glides and small-diameter metal legs suit wood-look tile or laminate flooring | |
| Low-profile interior scheme | Wide padded frame and 80 mm under-bed clearance fit modern low bed-height styling |
EU Market Access Requirements* EN Standards
| Safety and stability suggestion | EN 1725 strength, durability, and stability requirements for domestic beds | |
|---|---|---|
| Upholstery combustibility suggestion | EN 1021cigarette ignition test for upholstered textile and filling assembly | |
| Furniture strength test suggestion | EN 12520 strength, durability, and safety requirements for domestic seating-style padded furniture components |
Standards applicable to China-market projects
| Formaldehyde emission suggestion | GB/T 39600 E1 limit for any engineered-wood boards in the bed frame | |
|---|---|---|
| Wood furniture inspection suggestion | GB/T 3324 applicable to dimensions, workmanship, and structural stability of wooden furniture components | |
| Upholstered furniture safety suggestion | Recommended references: GB/T 39027 |
This product must meet the following technical requirements: 1. Formaldehyde emission suggestion: GB/T 39600 E1 limit for any engineered-wood boards in the bed frame; 2. Wood furniture inspection suggestion: GB/T 3324 applicable to dimensions, workmanship, and structural stability of wooden furniture components; 3. Upholstered furniture safety suggestion: Recommended references: GB/T 39027; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
