| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 1830 x 2340 x 1470 mm | |
|---|---|---|
| Mattress support area | 1530 x 2030 mm | |
| Headboard height above floor | 1120 mm | |
| Headboard thickness | 180 mm | |
| Footboard height above floor | 356 mm | |
| Footboard thickness | 160 mm | |
| Side rail height above floor | 350 mm | |
| Side rail thickness | 120 mm | |
| Under-bed clearance | 100 mm | |
| Recommended mattress thickness | 305 mm | |
| Sleeping surface height | 420 mm | |
| Slat width | 70 mm | |
| Slat thickness | 25 mm | |
| Slat spacing | 80 mm | |
| Center support legs | 3 units | |
| Footprint clearance around bed | 500 mm minimum side clearance and 700 mm foot clearance |
Net weight / load capacity / users / durability
| Recommended static load capacity | 363 kg | |
|---|---|---|
| Distributed occupant load | 227 kg | |
| Slat system static point load | 60 kg per slat | |
| Center beam point load | 120 kg | |
| Recommended net weight | 53 kg | |
| Mattress size capacity | Queen 1530 x 2030 mm | |
| Occupant capacity | 2 adults | |
| Expected daily use cycles | 10,000 mattress loading cycles | |
| Frame lateral racking resistance target | 200 N horizontal force without fastener loosening | |
| Assembly time | 50 minutes |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Beige woven polyester-family fabric with visible vertical sewn panels | |
|---|---|---|
| Headboard padding | High-resilience polyurethane foam pad over a structural panel | |
| Footboard padding | Continuous foam-cushioned upholstery with stitched vertical face seams | |
| Side rail upholstery | Fabric-wrapped padded rails with rounded top and corner treatment | |
| Internal frame substrate | Plywood, solid hardwood and engineered-wood hybrid structure | |
| Slat support system | Wood slats on side rails with a central support beam | |
| Support feet | Dark rectangular low-profile feet, likely wood or composite with protective pads | |
| Fasteners | Threaded bed bolts, cam locks, brackets and wood screws with corner blocks | |
| Internal back board | 25 mm structural wood-composite panel behind headboard padding | |
| Rail board core | 25 mm engineered-wood or plywood side-rail core | |
| Seam construction | Sewn fabric panel seams with 8 stitches per 25 mm target | |
| Fabric surface protection | Unspecified fabric treatment, with no visible leather or vinyl surface |
Adjustment / rotation / tilt / mobility / storage features
| Platform support | Slatted deck supports the mattress directly and eliminates a box spring | |
|---|---|---|
| Headboard function | Continuous padded headboard provides pillow backstop and soft wall protection | |
| Footboard function | Rounded padded footboard retains bedding and reduces impact injury at the bed end | |
| Side retention | Upholstered side rails contain the mattress and conceal the support structure | |
| Center support | Three legs along a central beam distribute queen-size loads across the floor | |
| Knock-down assembly | Headboard, footboard, side rails, slats and feet assemble with supplied hardware | |
| Floor protection | Small raised feet lift the fabric rail from the floor and accept glide pads | |
| Mattress compatibility | Foam, latex or hybrid mattresses up to 305 mm thick fit the platform support | |
| Bedding retention | Padded footboard and side rails reduce blanket and duvet slippage | |
| Cleaning access | 100 mm under-bed clearance permits targeted vacuum cleaning but not large storage bins | |
| No storage function | No lift-up mechanism, drawers or hydraulic hinges are visible | |
| No adjustment function | Fixed headboard angle and fixed sleeping height with no recline mechanism |
Verified carton / gross weight / assembly / loading data
| Total carton volume | 2.73 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suitable for a queen-bed room where a soft beige statement headboard and low frame are desired | |
|---|---|---|
| Modern minimalist interior | Fits neutral cream, warm gray or wood-tone rooms with ribbed wall panels and soft textiles | |
| Hotel guest room | Suitable for upscale boutique hotel rooms using durable woven fabric and a padded footboard | |
| Apartment furnishing | Suits furnished apartments requiring mattress-only platform setup without a box spring | |
| Secondary bedroom | Can serve guest or adult bedrooms with two-person sleeping capacity | |
| Bedroom pair configuration | Pairs with rounded low nightstands at both sides while preserving bedside circulation | |
| Soft-safe family room | Padded edges are appropriate where reduced sharp-corner impact is a design priority |
EU Market Access Requirements* EN Standards
| EN 1725:1998 applicability | Domestic bedding safety, strength and durability requirements for bed frames | |
|---|---|---|
| EN 12521:2015 applicability | Functional safety and durability requirements for domestic bedroom furniture | |
| EN 1021-1:2014 applicability | Upholstered furniture ignited cigarette smouldering assessment if fabric fire performance is specified |
Standards applicable to China-market projects
| GB/T 3324-2024 applicability | General technical requirements for wooden furniture, applicable to the wood bed frame and slat system | |
|---|---|---|
| GB/T 3325-2017 applicability | Metal furniture general technical requirements, applicable if steel brackets or center rails are used | |
| GB 18584-2001 applicability | Indoor wooden furniture limit for formaldehyde emission, relevant to engineered-wood components | |
| GB/T 10357.6-2013 applicability | Furniture test for bed strength and durability, suitable for static and cyclic load acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2024 applicability: General technical requirements for wooden furniture, applicable to the wood bed frame and slat system; 2. GB/T 3325-2017 applicability: Metal furniture general technical requirements, applicable if steel brackets or center rails are used; 3. GB 18584-2001 applicability: Indoor wooden furniture limit for formaldehyde emission, relevant to engineered-wood components; 4. GB/T 10357.6-2013 applicability: Furniture test for bed strength and durability, suitable for static and cyclic load acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
