| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall external size | 1900 x 2200 x 1100 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static load capacity | 350 kg | |
|---|---|---|
| Mattress distributed support load | 200 kg | |
| Headboard lateral leaning load | 80 kg | |
| Recommended maximum user weight per occupant | 150 kg | |
| Product net weight | 65 kg | |
| Mattress weight accommodation | 45 kg | |
| Suggested durability target | 30000 simulated loading cycles | |
| Assembly quantity | 1 bed frame per package set | |
| Recommended static bed load | 350 kg | |
| Mattress support deck distributed load | 200 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard facing fabric | Black-and-white houndstooth woven upholstery over padded panel | |
|---|---|---|
| Headboard cushion core | High-resilience polyurethane foam over rigid board backing | |
| Headboard substrate | 25 mm engineered timber board | |
| Side-rail upholstery | Grey woven or velvet-touch fabric with sewn edge panels | |
| Side-rail padding | 20 mm polyurethane foam layer | |
| Side-rail structural board | 18 mm plywood or particleboard frame | |
| Mattress support base | 15 mm plywood board or 60 mm spaced timber slat system | |
| Bed legs | Matte black powder-coated steel tube, 25 mm nominal section | |
| Fastening hardware | Carbon-steel bolts, dowels and corner brackets with black oxide or zinc plating | |
| Leg foot pads | Polyethylene or nylon floor-protection pads, 3 mm thickness | |
| Edge detailing | Tailored sewn fabric border around rounded headboard and rail edges | |
| Headboard facing | Black-and-white houndstooth woven upholstery over padded curved panel |
Adjustment / rotation / tilt / mobility / storage features
| Mattress platform support | Flat deck or 60 mm-spaced slats supports an 1800 x 2000 mm mattress without a box spring | |
|---|---|---|
| Center-load distribution | One longitudinal beam and 2 intermediate legs divide the span and reduce mattress deck deflection | |
| Knock-down assembly | Bolt-on headboard, two side rails, foot rail, support deck, and 6 legs join with M8 hardware for site assembly | |
| Headboard support | Padded 120 mm panel provides a vertical leaning surface rated to an 80 kg lateral load | |
| Under-bed access | 140 mm floor clearance permits robot vacuum passage and routine cleaning | |
| Floor protection | Six polymer foot pads distribute point loads and reduce scratching on hard flooring | |
| Fixed bed orientation | Low side rails and fixed headboard position the bed against a wall with no recline or lift mechanism | |
| Bedding retention | 350 mm rail height contains a 250 mm mattress while leaving the upper headboard exposed | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Master bedroom | Suits an 1800 mm wide bed for two adults, with the padded headboard supporting reading and resting | |
|---|---|---|
| Boutique hotel guest room | Provides a styled houndstooth focal point while retaining a compact 2200 mm footprint | |
| Serviced apartment | Coordinates with nightstands and rugs in long-stay residential interiors | |
| Teenager or guest bedroom | Low 320 mm platform and 140 mm clearance support easy access and cleaning | |
| Modern residential renovation | Grey rails and black legs pair with pink, white, wood, or neutral palettes | |
| Interior-design display room | Suitable for showroom styling because the curved patterned headboard is visually distinctive | |
| Small hotel or rental property | Fabric platform design offers simple replacement bedding fit without requiring a box spring |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
