| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled size | 2250 x 2100 x 1210 mm | |
|---|---|---|
| Mattress support area | 2030 x 1930 mm | |
| Headboard visible size | 2100 x 1210 x 180 mm | |
| Padded grid layout | 4 columns x 3 rows, 12 panels | |
| Individual headboard panel | 470 x 300 x 30 mm | |
| Side rail height | 320 mm | |
| Side rail thickness | 80 mm | |
| Foot rail size | 2100 x 320 x 80 mm | |
| Under-bed clearance | 180 mm | |
| Metal leg size | 180 x 30 x 30 mm | |
| Slat count | 13 slats | |
| Slat spacing | 80 mm clear gap | |
| Center support rail | 2030 x 60 x 30 mm | |
| Center support legs | 3 legs | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Static bed-system load | 272 kg | |
|---|---|---|
| Recommended mattress thickness | 305 mm | |
| Net weight | 47 kg | |
| Perimeter rail distributed load | 150 kg | |
| Slat distributed support | 45 kg per slat | |
| Center support leg point load | 45 kg per leg | |
| Occupant capacity | 2 adults | |
| Floor contact points | 7 points | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Matte light gray woven fabric over foam padding | |
|---|---|---|
| Headboard padding | 30 mm polyurethane foam panel layer | |
| Headboard core | 25 mm engineered wood or laminated veneer lumber panel | |
| Side and foot rails | Light gray woven fabric over engineered-wood rails with foam-edged build-up | |
| Bed slats | 12 mm bent plywood or laminated wood slats | |
| Center beam | 30 mm laminated wood or engineered wood rail | |
| Corner legs | Black powder-coated square metal legs, 30 mm section | |
| Fasteners | Black steel bolts, barrel nuts, and corner brackets | |
| Under-bed covering | Non-woven fabric dust cover | |
| Edge tailoring | Straight stitched seams around upholstered rails | |
| Floor protection | High-density polymer foot glides on metal legs | |
| Slat Thickness | 15 mm bent plywood or solid timber |
Adjustment / rotation / tilt / mobility / storage features
| Box spring requirement | No box spring; mattress rests directly on the wood slat platform | |
|---|---|---|
| Headboard support | Fixed padded headboard provides seated back support and wall protection | |
| Slat ventilation | 13 slats with 80 mm clear spacing allow air circulation under the mattress | |
| Load distribution | Longitudinal center beam and three support legs divide mattress load across the floor | |
| Knock-down assembly | Headboard, rails, slat roll, legs, and hardware join with bolted corner connectors | |
| Under-bed access | 180 mm open clearance permits robot vacuum access and limited low-profile storage | |
| Stability design | Angled black metal corner legs resist lateral movement without a footboard | |
| Mattress retention | Upholstered side and foot rails contain the mattress within the platform perimeter | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a King bed placement centered against a wall with bedside tables on both sides | |
|---|---|---|
| Modern residential interior | Light gray fabric and black legs fit neutral, minimalist, and contemporary rooms | |
| Hotel guest room | Platform support and padded headboard suit durable mid-scale room specifications | |
| Apartment furnishing | Low-profile form and flat-pack logistics suit turnkey apartment packages | |
| Pairing recommendation | Use with two compact two-drawer nightstands and low-pile area rug | |
| Mattress setup | Pair with a 305 mm thick King mattress placed directly on slats |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
