| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Bed frame net weight | 58 kg | |
|---|---|---|
| Recommended mattress weight | 45 kg | |
| Static load capacity | 350 kg | |
| Recommended occupant capacity | 2 adults | |
| Slat support point count | 12 slats | |
| Slat spacing | 90 mm | |
| Single slat distributed load | 25 kg | |
| Leg floor load points | 4 legs | |
| Warranty target | 5 years | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard facing | Grey upholstered fabric or leather-look fabric over padded panels | |
|---|---|---|
| Headboard padding | 25 mm polyurethane foam over hard panel | |
| Internal frame | 18 mm engineered wood board with reinforced corner blocks | |
| Side and foot rails | Upholstered engineered-wood frame with matching grey outer facing | |
| Bed slats | 12 mm plywood or solid-wood slats in a support frame | |
| Support legs | 25 mm powder-coated steel tapered legs | |
| Leg mounting plates | 2.0 mm steel plates with four-screw fixation | |
| Panel joinery | Two headboard panels joined over a central structural stile | |
| Floor-contact feet | Injection-molded polypropylene protective pads | |
| Upholstery seam | Single-needle perimeter stitching with 8 mm stitch pitch | |
| Bed base board | 12 mm board platform or slat-support deck | |
| Surface finish | Matte grey soft covering with black metal legs |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Fixed queen-size double bed for one 1800 x 2000 mm mattress | |
|---|---|---|
| Mattress support | Horizontal slat or board deck distributes weight across the frame | |
| Head restraint | Padded full-width headboard provides pillow support and wall protection | |
| Under-bed access | 120 mm open clearance allows flat cleaning attachments and limited under-bed storage | |
| Assembly method | Knock-down headboard, side rails, foot rail, support deck, and four bolt-on legs | |
| Floor stabilization | Four independent metal legs transfer loads directly to the floor | |
| Wall placement | Designed for headboard-flush placement against a flat wall | |
| Noise control target | Threaded inserts, lock washers, and felt foot pads intended to limit joint movement | |
| Storage configuration | No drawers or lift-up storage are present | |
| Color option target | 1 standard grey upholstery color with black legs | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Assembly time | 50 minutes for two people using basic hand tools | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a modern main bedroom with an 1800 mm queen mattress and two adult users | |
|---|---|---|
| Hotel guest room | Suitable for upscale minimalist hotel rooms requiring a soft headboard and durable metal-leg base | |
| Serviced apartment | Fits furnished apartments where wall protection, compact clearance, and neutral styling are required | |
| Bedroom with nightstands | Pairs with low nightstands placed at both sides of the headboard | |
| Hard-floor installation | Recommended for wood or tile floors when fitted with protective foot pads | |
| Low-profile interior style | Fits modern, wabi-sabi, or contemporary neutral interiors | |
| Cleaning access | Open 120 mm under-bed clearance supports robotic or manual vacuum cleaning |
EU Market Access Requirements* EN Standards
| Domestic furniture safety | EN 1725:1998 for safety requirements and strength of domestic beds | |
|---|---|---|
| Mattress dimensions | EN 13186:2004 terminology and size compatibility for bedding | |
| Formaldehyde emission | EN 13986 for wood-based panels used in interior furniture |
Standards applicable to China-market projects
| Formaldehyde emission | GB/T 39600 E1 as procurement acceptance limit for engineered-wood components | |
|---|---|---|
| Furniture safety | GB/T 3324 for general wooden furniture dimensions, materials, and structural inspection | |
| Upholstered furniture durability | GB/T 44517 as a suggested durability and safety acceptance reference |
This product must meet the following technical requirements: 1. Formaldehyde emission: GB/T 39600 E1 as procurement acceptance limit for engineered-wood components; 2. Furniture safety: GB/T 3324 for general wooden furniture dimensions, materials, and structural inspection; 3. Upholstered furniture durability: GB/T 44517 as a suggested durability and safety acceptance reference; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
