| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall closed dimensions | 1105 x 650 x 500 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Rear extension surface dimensions | 350 x 350 x 15 mm | |
| Under-base floor clearance | 80 mm | |
| Lift-top maximum raised height | 545 mm | |
| Hidden storage compartment internal depth | 180 mm | |
| Front fluted panel height | 320 mm | |
| Rounded corner radius | 30 mm | |
| Base side panel thickness | 18 mm | |
| Rear extension height above closed main top | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 35 kg | |
|---|---|---|
| Lifted tabletop static load capacity | 25 kg | |
| Hidden storage compartment maximum load | 20 kg | |
| Surface scratch resistance rating | 2000 cycles | |
| Lift mechanism cycle life | 5000 operations | |
| Recommended maximum user weight for lifted work surface | 50 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop core | 18mm thick MDF engineered wood core | |
|---|---|---|
| Main tabletop finish | Scratch-resistant wood grain laminate/veneer over core | |
| Base structural panels | 18mm thick particleboard/MDF with matte light taupe paint finish | |
| Front decorative panel | Vertically fluted MDF panel matching base finish | |
| Lift mechanism hardware | Powder-coated steel spring-assisted lift hinges | |
| Base edge trim | Brushed metallic thin accent trim along top base perimeter | |
| Recessed lift handle | Matte black embedded rectangular pull handle | |
| Rear extension surface | Matching wood grain finish on 15mm MDF core | |
| Base support feet | Integrated low-profile raised feet on base bottom corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Lift-top height adjustment | Spring-assisted hinge raises main top 545mm from closed position for elevated work/dining use | |
|---|---|---|
| Hidden under-top storage | Large enclosed compartment under lift top stores blankets, media and small items | |
| Fixed rear side extension | Raised secondary surface at rear of base holds drinks, decor or remotes without lifting main top | |
| Front foot clearance cutout | Curved recess along front base edge allows comfortable foot placement when seated close to table | |
| Rounded anti-collision corners | Soft radiused edges on all top and base corners reduce impact injury risk | |
| Smooth lift operation | Equipped with anti-jam hardware to prevent binding during raising and lowering | |
| Two-tone design coordination | Warm wood top paired with light neutral base matches modern, wabi-sabi and contemporary living room decor | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of sofas or sectionals for drinks, snacks, remote storage and casual laptop use | |
|---|---|---|
| Small apartment multi-function use | Serves as both coffee table and temporary work/dining surface via lift-top to save space | |
| Modern interior design schemes | Fits minimalist, contemporary, light luxury and wabi-sabi style interiors with two-tone fluted design | |
| Family room casual use | Rounded corners and stable construction suitable for households with children and daily high-frequency use | |
| Studio open-plan layouts | Rear extension provides extra display space without expanding overall table footprint |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable for load and stability testing | |
|---|---|---|
| EN 14749:2016 | Domestic and kitchen storage units and worktops, applicable for storage compartment safety requirements |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability and finish quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability and finish quality checks; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
