| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall desk dimensions | 3200 x 1100 x 760 mm | |
|---|---|---|
| Worktop thickness | 50 mm | |
| Central knee clearance width | 1800 mm | |
| Knee clearance height under worktop | 680 mm | |
| Modesty panel thickness | 30 mm | |
| Stainless steel trim strip width | 20 mm | |
| End support depth at floor | 800 mm | |
| Matching credenza dimensions | 3600 x 500 x 2000 mm | |
| Edge band thickness | 2 mm | |
| Cable grommet diameter | 80 mm | |
| Adjustable floor glide height adjustment | 15 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Worktop static load capacity | 150 kg | |
|---|---|---|
| Net weight (desk only) | 210 kg | |
| Recommended user weight capacity | 150 kg | |
| Drawer slide load rating (credenza) | 45 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Hinge cycle rating (credenza doors) | 100000 cycles | |
| Warranty period | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop substrate | E0-grade high-density MDF board | |
|---|---|---|
| Worktop finished surface | Book-matched burl wood veneer with high-gloss clear lacquer | |
| Side supports and modesty panel base | Matte gray polyurethane lacquered engineered wood | |
| Modesty panel accent inlay | Top-grain leather upholstery over padding | |
| Edge and joint trim | Brushed 304 stainless steel strips | |
| Internal support frame | 1.5mm thick powder-coated square steel tubing | |
| Floor glides | Nylon base with stainless steel threaded stem | |
| Drawer hardware (credenza) | Cold-rolled steel full-extension ball-bearing slides | |
| Door hinges (credenza) | Soft-close steel concealed hinges | |
| Worktop surface coating | Scratch-resistant UV-cured clear lacquer | |
| Cable management components | ABS plastic grommets and steel cable tray | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Cable management system | Dual 80mm grommets with under-desk steel cable tray | |
|---|---|---|
| Floor leveling adjustment | 12 adjustable glides with 15mm vertical travel | |
| Credenza storage configuration | 2 closed side cabinets, 3 open display shelves, 1 lower drawer bank | |
| Soft-close door/drawer operation | Dampened hinges and slides prevent slamming | |
| Integrated modesty panel | Full-height curved panel blocks kneewell visibility | |
| Locking storage option | Central lock secures all credenza drawers and doors | |
| Desk pad compatibility | Full-width leather inlay option fits flush within worktop trim | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| CEO private office | Primary use for senior executive individual work and meetings | |
|---|---|---|
| Boardroom auxiliary workspace | Secondary use as supporting surface for board meeting materials | |
| Luxury home office | Suitable for high-end residential executive home workspaces | |
| Executive meeting room | Placement as presenter desk for small executive briefings | |
| VIP reception office | Use in high-level client meeting spaces for senior staff | |
| Matching open office configuration | Pairs with leather executive chairs and guest seating |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables safety and strength requirements, applicable to desk structural performance | |
|---|---|---|
| EN 13722:2004 | Furniture storage units strength and durability, applicable to matching credenza | |
| EN 71-3:2019 | Migration of certain elements, applicable to surface finish safety |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products safety and durability standard, applicable for commercial office use | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units performance standard, applicable to matching credenza unit |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural and finish quality | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for wooden furniture, applicable to E0-grade panel substrates | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to engineered wood structural components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural and finish quality; 2. GB 18584-2001: Formaldehyde emission limit for wooden furniture, applicable to E0-grade panel substrates; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable to engineered wood structural components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
