| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall closed dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Lifted total table height | 700 mm | |
| Lift-top panel dimensions | 700 x 600 mm | |
| Fixed left top panel dimensions | 500 x 600 mm | |
| Recessed open storage well internal dimensions | 450 x 550 x 120 mm | |
| Hidden under-lift storage compartment internal height | 345 mm | |
| Tabletop panel thickness | 25 mm | |
| Fluted front panel slat width | 20 mm | |
| Power module faceplate dimensions | 100 x 40 mm | |
| Plinth base foot height | 20 mm | |
| Corner radius on all edges | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Overall table static distributed load | 204 kg | |
|---|---|---|
| Lifted tabletop maximum static load | 50 kg | |
| Recessed storage compartment maximum load | 91 kg | |
| Hidden under-lift storage maximum load | 91 kg | |
| Lift mechanism travel distance | 250 mm | |
| Integrated AC outlet power rating | 1500W | |
| Integrated USB port output rating | 12W | |
| Power supply cord length | 1.5 m | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm thick CARB P2 grade MDF core | |
|---|---|---|
| Tabletop surface finish | 0.6mm light oak wood veneer with matte wear-resistant lacquer | |
| Fixed side and end panels | 15mm thick particleboard with off-white matte paint coating | |
| Front decorative panel | 12mm thick MDF with vertical fluted routing and off-white matte finish | |
| Lift mechanism components | 1.5mm thick powder-coated steel lift arms with soft-close buffer hinges | |
| Plinth base trim | PVC edge banding with matte off-white finish, 2mm thick | |
| Recessed storage well lining | Matching light oak laminate surface, wear-resistant easy-clean coating | |
| Integrated power module housing | Flame-retardant ABS plastic casing with USB-A/AC outlets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Lift-top height adjustment | Spring-assisted metal lift arm raises top to stable working height with one-hand operation | |
|---|---|---|
| Dual-zone storage access | Recessed open well on fixed left section plus enclosed hidden compartment under lift top | |
| Integrated device charging | Side-panel power module provides 2 AC outlets and 2 USB-A ports for laptop/phone charging | |
| Lift-top stable locking | Mechanical lock holds raised tabletop in fixed elevated position | |
| Soft-close lowering | Buffer hinges reduce lowering speed to prevent finger pinching and surface impact | |
| Anti-collision edge design | All tabletop and base corners rounded to 25mm radius | |
| Low-profile plinth support | Fully enclosed block base distributes weight evenly across floor | |
| Surface stain resistance | Matte lacquer finish repels liquid spills and allows wipe-clean maintenance | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Placed in front of sofas for snack service, laptop work, and remote control storage | |
|---|---|---|
| Small apartment multi-function space | Serves as alternative dining or work surface when lift top is raised | |
| Home media room setup | Integrated charging ports power streaming devices, phones and remotes without trailing cords | |
| Modern minimalist interior schemes | Two-tone oak/off-white fluted design coordinates with Scandinavian and contemporary decor | |
| Rental property furnishing | Durable easy-clean surface and built-in storage reduce need for additional furniture | |
| Open-concept lounge areas | Wide rectangular footprint anchors seating groupings in large open living spaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic living room tables | |
|---|---|---|
| EN 62368-1:2020 | Safety standard for audio/video, information and communication technology equipment in furniture chargers | |
| EN 312:2010 | Performance requirements for particleboard substrates used in furniture construction |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural acceptance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, required for indoor air quality compliance | |
| GB 7000.204-2008 | Safety requirements for furniture-integrated electrical outlets and charging components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural acceptance; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor air quality compliance; 3. GB 7000.204-2008: Safety requirements for furniture-integrated electrical outlets and charging components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
