Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2200 × 1000 × 750 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Product net weight	135 kg
Distributed desktop load	80 kg
Pedestal top load	40 kg
Drawer or shelf reference load	15 kg per storage level
Recommended user size	1 person
Horizontal stability target	2 degree floor unevenness
Drawer or door cycle reference	50,000 cycles
Surface impact acceptance	18 N steel-ball impact without delamination
Edge bond heat resistance	80 degrees C for 20 minutes
Top Static Load Reference	150 kg uniformly distributed

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Desktop panel	50 mm wood-composite core with taupe laminate or veneer-look surface and rounded edge
Cabinet panels	Warm-white painted or melamine-faced composite panels with vertical grain-free smooth finish
Left curved support	Curved painted panel with dark bottom trim and a 50 mm cylindrical metal support post
Modesty panel	Warm-white flat composite privacy panel recessed below the desktop
Base and plinth	Dark laminated or PVC-recessed plinth around the pedestal and curved support
Cable fitting	Black plastic rectangular desktop grommet with brush or hinged cover appearance

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seated work configuration	750 mm work height with a 1200 mm central knee bay for a task chair and visitor-side consultation
Cable management	160 x 80 mm rear-right grommet routes monitor and laptop cables into the pedestal-side cavity
Right-side storage support	600 mm-wide enclosed pedestal provides storage or CPU space under the right work zone
Privacy screening	450 mm-high modesty panel conceals the seated leg area and supports a formal executive appearance

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Total packed volume	0.641 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive office	Suits a manager or director office where laptop work, document review, and one-to-one discussions occur across the 2100 mm work surface
Senior administrative workstation	Fits reception-back offices, finance rooms, or private consulting spaces requiring concealed storage and rear cable routing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1 applicability	Office worktables and desks: safety, strength, and durability requirements for a non-domestic workstation
EN 527-2 applicability	Office worktables: mechanical safety, structural strength, and durability test methods
EN 15372 applicability	Durability and strength requirements for non-domestic storage furniture, applicable to the right pedestal
EN 14073-2 applicability	Safety requirements for office storage furniture, applicable to cabinet stability and moving parts
EN 717-1 applicability	Formaldehyde release determination by chamber method for wood-based panels

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324 applicability	General technical requirements for wooden furniture, applicable to dimensions, workmanship, edge bonding, and panel stability
GB/T 3325 applicability	Metal furniture technical requirements applicable if the support post, rails, or frame are metal
GB 18584 applicability	Indoor decorative-decorating materials limit for formaldehyde release on wood-based furniture
GB/T 10357.5 applicability	Furniture mechanical surface test for paint and coating resistance, applicable to desktop and painted panel finishes
GB/T 10357.6 applicability	Furniture mechanical floor-protection and leg-strength test, applicable to cabinet plinths and support feet
GB/T 4893.4 applicability	Furniture surface test for adhesion of film finishes, applicable to painted cabinet panels

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324 applicability: General technical requirements for wooden furniture, applicable to dimensions, workmanship, edge bonding, and panel stability;
2. GB/T 3325 applicability: Metal furniture technical requirements applicable if the support post, rails, or frame are metal;
3. GB 18584 applicability: Indoor decorative-decorating materials limit for formaldehyde release on wood-based furniture;
4. GB/T 10357.5 applicability: Furniture mechanical surface test for paint and coating resistance, applicable to desktop and painted panel finishes;
5. GB/T 10357.6 applicability: Furniture mechanical floor-protection and leg-strength test, applicable to cabinet plinths and support feet;
6. GB/T 4893.4 applicability: Furniture surface test for adhesion of film finishes, applicable to painted cabinet panels;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EDC-2200-RP-CABLE

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EDC-2200-RP-CABLE

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EDC-2200-RP-CABLEOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Curved Executive Desk with Right Storage Pedestal and Cable Port, model EDC-2200-RP-CABLE, presents a formal two-tone executive profile suited to private offices and professional consultation settings. Its broad 2100 mm work surface combines a curved front edge with a right-side storage pedestal, creating a generous central knee bay for a task chair while allowing interaction across the desk in a visitor-side layout. The taupe desktop uses a laminated wood-composite panel with a rounded edge and veneer-look appearance, contrasted by warm-white cabinet panels with a smooth, grain-free finish. A curved painted support on the left includes dark bottom trim and a cylindrical metal post, while a recessed warm-white modesty panel screens the seated leg area and reinforces the desk’s structured, managerial appearance. The pedestal and curved support sit on dark laminated or PVC-recessed plinth detailing. Construction is based on a 50 mm wood-composite desktop, painted or melamine-faced composite cabinet panels, painted MDF side cabinets, and a 50 mm metal support post with a 2 mm wall section. The desk is intended for one user, with a 750 mm work height, 680 mm knee clearance height, and 900 mm knee clearance width at the main seat. The distributed desktop load is rated at 80 kg, the pedestal top at 40 kg, and each storage level at 15 kg. Its finished net weight is 135 kg, and the support design targets level operation on floors with up to 2 degrees of unevenness. Functional features focus on orderly executive work. The enclosed 600 mm-wide right pedestal provides concealed storage or space for a CPU beneath the right work zone. At the rear right, a black plastic rectangular desktop grommet with a brush or hinged cover appearance routes monitor and laptop cables into the pedestal-side cavity. The cable opening is specified as 160 x 80 mm, with an 80 mm diameter reference and a cable tray depth of 120 mm. Drawer and door hardware carries a 50,000-cycle reference. The desk is appropriate for manager or director offices used for laptop work, document review, and one-to-one discussions. It also fits senior administrative workplaces such as reception-back offices, finance rooms, and private consulting spaces where hidden storage and rear cable routing are priorities. Procurement planning should account for freight and installation logistics: the set is supplied in multiple cartons, with reference packaging indicating 2 cartons per set and packaged logistics listing 4 cartons, 180 kg gross weight, and 1 cubic meter per set. The main top pack measures 2500 x 1050 x 350 mm, with the return or pedestal packed separately. Assembly time is referenced at 40 minutes per set. Buyers should confirm site access, floor protection, delivery conditions, pedestal layout, and required cable orientation before purchase.

Curved Executive Desk with Right Storage Pedestal and Cable Port Specifications

Suppliers and stock