| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (staggered configuration) | 1200 x 900 x 350 mm | |
|---|---|---|
| Larger table individual dimensions | 1000 x 800 x 350 mm | |
| Smaller nesting table individual dimensions | 700 x 600 x 300 mm | |
| Table top panel thickness | 50 mm | |
| Plinth base side wall thickness | 30 mm | |
| Nesting clearance under larger table | 320 mm | |
| Table top edge chamfer width | 10 mm | |
| Floor contact surface width | 30 mm | |
| Gap between nested tables (staggered position) | 20 mm | |
| Smaller table offset distance from large table edge | 200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 60 kg | |
|---|---|---|
| Distributed static load capacity per table | 110 kg | |
| Floor load rating (distributed) | 85 kg/m² | |
| Recommended maximum number of place settings | 4 | |
| Surface scratch resistance (pencil hardness) | 2H | |
| Structural warranty (residential use) | 3 years | |
| Available finish color options | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table body structure | 1.5mm cold-rolled steel sheet monolithic welded construction | |
|---|---|---|
| Surface finish | Antique brushed bronze powder coating with hand-applied patina | |
| Internal structural reinforcement | 2mm steel internal cross bracing at plinth corners | |
| Table top surface | Smooth matte metallic sealed top with no additional overlay | |
| Floor protection pads | 5mm thick non-marking EVA felt pads at plinth base corners | |
| Weld joints | Ground and polished smooth invisible welded seams | |
| Coating thickness (topcoat) | 80μm | |
| Material moisture content (metal components) | 0% | |
| Edge finishing | Deburred smooth rounded 1mm radius edges on all top perimeters | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Nesting adjustment | Smaller table slides freely along floor to tuck under larger table | |
|---|---|---|
| Surface utilization | Flat, level top supports books, decorative objects and beverage service items | |
| Floor compatibility | Full perimeter plinth base sits stably on low-pile carpet and hard flooring | |
| Layout flexibility | Tables can be positioned fully separated, partially nested, or fully offset | |
| Maintenance access | Smooth non-porous metal surface wipes clean with dry or damp soft cloth | |
| Assembly requirement | Fully welded assembled units ship with no consumer assembly needed | |
| Load distribution | Continuous plinth base spreads weight evenly to avoid floor indentation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Centered in front of curved or modular sectional living room sofas | |
|---|---|---|
| Secondary residential use | Served as low accent table set in open-concept lounge or reception seating areas | |
| Recommended room size | 20 m² or larger living spaces | |
| Style compatibility | Pairs with modern, contemporary, minimalist and luxe industrial interior schemes | |
| Surface use guideline | Supports coffee table books, decorative trays, candle holders and small beverage service items | |
| Designer configuration recommendation | Position smaller table offset at 45 degrees to larger table for a curated asymmetric look | |
| Commercial space use | Suitable for boutique hotel lobbies, high-end office waiting areas and luxury lounge spaces |
EU Market Access Requirements* EN Standards
| EN 15372:2008+A1:2016 | Furniture - Strength, durability and safety for domestic tables, applicable for load performance | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability, applicable for plinth base safety |
US and Canada office-furniture standards
| ANSI/BIFMA X7.1-2022 | Furniture sustainability standard, optional for low-emission coating verification |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to dimensional and structural tolerances | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test for furniture coatings, recommended for finish durability acceptance | |
| GB/T 4893.9-2013 | Impact resistance test for furniture surfaces, recommended for metal top performance validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to dimensional and structural tolerances; 2. GB/T 4893.8-2013: Surface wear resistance test for furniture coatings, recommended for finish durability acceptance; 3. GB/T 4893.9-2013: Impact resistance test for furniture surfaces, recommended for metal top performance validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
