Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1400 × 750 × 420 mm
Overall large table dimensions	1400 x 750 x 420 mm
Tabletop thickness	20 mm
Large table support panel height	390 mm
Small table support panel height	320 mm
Metal support panel wall thickness	3 mm
Small table nesting under-table clearance (large unit)	330 mm
Table edge profile radius	15 mm
Large table floor contact footprint	1300 x 680 mm
Small table floor contact footprint	820 x 520 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Large table total weight	80 kg
Small table total weight	45 kg
Large table distributed static load capacity	100 kg
Tabletop Mohs surface hardness	7
Tabletop heat resistance temperature	1200 °C
Frame rust resistance service life	5 years
Table weight capacity static load test point	50 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large table tabletop	Dark brown sintered stone with light linear veining, matte finish
Small table tabletop	Dark grey textured sintered stone, matte finish
Support panels	Brushed dark bronze finished stainless steel, curved monolithic form
Tabletop underside backing	10mm MDF reinforcement panel
Floor contact pads	8mm thick non-slip felt pads, pre-applied to base bottoms
Connection hardware	M8 zinc-plated steel bolts and locking nuts
Metal surface treatment	Brushed antique bronze PVD coating
Tabletop edge treatment	Hand-polished rounded eased edge, no sharp corners
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Small table tucks 60% of its depth under the large table
Separate use function	Two tables can be positioned independently in separate seating zones
Surface stain resistance	Non-porous stone surface wipes clean with dry or damp cloth
Anti-scratch surface performance	Hard stone surface resists scuffs from decor, trays and remote controls
3-point support stability	Three curved panel supports per table prevent wobble on uneven floors
Floor protection	Felt base pads prevent scratching on hardwood, tile and polished stone floors
Assembly structure	Knock-down design with base panels attached to tabletop via bolts
Customization support	Table size, stone pattern and metal finish are customizable per order
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary use space	Modern luxury living rooms positioned in front of sofas and sectionals
Secondary use space	Open-plan lounge areas, hotel lobbies and high-end residential reception spaces
Suitable user groups	Design-focused residential homeowners, interior designers, premium furniture retailers
Recommended layout (paired)	Position large table centered in front of main seating, small table offset to side for extra surface
Recommended layout (separated)	Place large table in main seating area, small table beside a single accent chair
Surface use case support	Holds coffee trays, decorative objects, books, candles and table lamps
Space-saving benefit	Ideal for smaller luxury apartments where dual surface space is needed without extra footprint

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Furniture surface resistance to cold liquids	EN 12720:2013
Furniture surface scratch resistance	EN 15186:2012
Domestic tables safety requirements	EN 12521:2015
Furniture strength and durability	EN 1730:2000

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop stone performance	GB/T 35165
Metal furniture structural safety	GB/T 3324
Formaldehyde emission limits	GB 18584
Furniture mechanical stability	GB/T 10357.1

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop stone performance: GB/T 35165;
2. Metal furniture structural safety: GB/T 3324;
3. Formaldehyde emission limits: GB 18584;
4. Furniture mechanical stability: GB/T 10357.1;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-PBZ-2PC-1400

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-PBZ-2PC-1400

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-PBZ-2PC-1400Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-piece organic pebble nesting coffee table set brings refined modern luxury to seating areas with its soft, rounded silhouettes and coordinated two-tone tabletops. The set features a low-profile, seating-height form shaped to evoke smooth water-worn pebbles, with hand-polished rounded eased edges that eliminate sharp corners for a gentle, approachable visual presence. When paired, the large table anchors central seating layouts, while the smaller table sits offset to the side; 60% of the small table’s depth tucks neatly under the large table to free up floor space when not in use. The tables can also be separated entirely to serve distinct seating zones across a space.
Each tabletop is constructed from sintered stone with a matte finish: the large table features dark brown stone with subtle light linear veining, while the small table has a dark grey textured surface. A 10mm MDF reinforcement panel sits under each tabletop for added structural rigidity, and each unit is supported by three curved monolithic stainless steel panels finished with brushed dark bronze PVD coating. This 3-point support design minimizes wobble on uneven flooring, while pre-applied 8mm non-slip felt pads at the base protect hardwood, tile, and polished stone floors from scuffs. Connection points use zinc-plated steel bolts and locking nuts for durable, long-lasting assembly, and the knock-down structure allows for straightforward on-site setup. The non-porous sintered stone surfaces resist stains, wiping clean easily with a dry or damp cloth, and stand up to scuffs from everyday items like trays, decor, and remote controls; the hard surface also delivers high heat resistance for versatile daily use. Each table offers stable static load capacity to hold coffee trays, books, decorative objects, candles, and table lamps.
This set is ideally suited for modern luxury living rooms positioned in front of sofas and sectionals, and also works seamlessly in open-plan lounge areas, hotel lobbies, and high-end residential reception spaces. It caters to design-focused homeowners, interior designers, and premium furniture retailers. Procurement teams should note the set ships in two cartons, with a 40-minute reference assembly time per unit, and plan appropriate handling for the packaged weight and volume to support smooth delivery and installation workflows.

2-Piece Organic Pebble Nesting Coffee Table Set with Stone Tops and Brushed Bronze Bases Specifications

Suppliers and stock