| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 550 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Lower shelf height from floor | 200 mm | |
| Vertical leg profile width | 40 mm | |
| Frame tube wall thickness | 1.2 mm | |
| Tea drain grate dimensions | 580 x 380 mm | |
| Lower shelf clearance under top frame | 290 mm | |
| Frame overhang around tabletop | 15 mm | |
| Lower shelf usable width between frame legs | 1180 mm | |
| Lower shelf usable depth between side frames | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 38 kg | |
|---|---|---|
| Tabletop static load capacity | 100 kg | |
| Recommended number of users for tea service | 6 | |
| Tabletop surface heat resistance | 180 °C | |
| Shelf edge impact resistance | 45 J | |
| Warranty period for frame and structure | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary tabletop | 12mm black sintered stone with fine gold linear veining, polished glossy finish | |
|---|---|---|
| Structural frame | Matte black powder-coated carbon steel square tube, welded open box frame construction | |
| Lower storage shelf | 8mm black tempered glass, fixed to steel cross supports via rubber anti-slip gaskets | |
| Integrated tea drain grate | Stainless steel slatted drain panel, recessed flush into tabletop for tea runoff drainage | |
| Tea appliance recessed pad | Heat-resistant textured melamine pad, recessed into tabletop to support electric kettle and sterilizer pot | |
| Frame foot pads | Non-marking TPE adjustable glide pads, fitted to bottom of each leg to protect flooring | |
| Powder coating finish | Epoxy-polyester matte powder coat, 60um average thickness, corrosion resistant for indoor use | |
| Assembly hardware | Zinc-plated M8 hex bolts with nylon lock nuts, 16 total fasteners for frame and shelf attachment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service zone | Recessed heat-resistant pad and sloped drain grate on tabletop to hold boiling kettle, sterilizer pot and tea set, with routed drain outlet for wastewater to collection bucket | |
|---|---|---|
| Open lower storage shelf | Full-width flat tempered glass shelf for storage of water bottles, books and tea supplies, with unobstructed front access | |
| Stain-resistant tabletop surface | Non-porous sintered stone surface that resists tea stains, water rings and heat marks, requiring only wipe cleaning after use | |
| Open frame access clearance | 350mm front knee clearance between lower shelf and table apron to allow seated use without leg obstruction | |
| Adjustable floor glides | 10mm adjustment range on each leg foot pad to level the table on uneven carpet or tile flooring | |
| Wastewater routing capacity | Drain channel sized to connect to standard 10mm tea drain hose, directing spilled tea to a standard 18.9L water bottle wastewater reservoir | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 | |
|---|---|---|
| Shipping carton dimensions | 1380 x 780 x 170 mm | |
| Gross shipping weight | 44 kg | |
| Shipping volume per unit | 0.183 CBM | |
| Assembly time per unit | 30 minutes | |
| 20ft GP container loading quantity | 156 units | |
| 40ft HQ container loading quantity | 390 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Residential living room application | Positioned in front of sofas in home living rooms for daily tea service, casual drinks and small item display, with height optimized for seated use from standard sofas | |
|---|---|---|
| Office reception area application | Used in small office reception or lounge areas to serve tea to visiting guests, with durable scratch-resistant surface suited for high-traffic public use | |
| Tea room dedicated use | Installed in dedicated home or commercial tea rooms for gongfu tea preparation, with integrated drain design eliminating need for separate tea tray | |
| Small apartment dining alternative | Functions as a compact low dining table for studio apartments or tatami seating spaces, with load capacity sufficient for meals and laptop use | |
| Recommended accessory pairing | Pairs with 18.9L standard bottled water reservoirs, electric tea kettles and ceramic gongfu tea sets to form a fully functional tea station |
EU Market Access Requirements* EN Standards
| Furniture mechanical safety | EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables, applicable for structural load and stability testing for household coffee tables | |
|---|---|---|
| Glass component safety | EN 12150:2015 Glass in building - Thermally toughened soda lime silicate safety glass, applicable for safety performance of the tempered glass lower shelf | |
| Surface emission limits | EN 16516:2017 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air, applicable for VOC emission limits for indoor furniture |
Standards applicable to China-market projects
| Tabletop safety performance | GB/T 3324General technical requirements for wooden furniture, applicable for dimensional stability, surface finish and edge safety requirements for household tables | |
|---|---|---|
| Tempered glass safety | GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for impact resistance and fragmentation requirements for the lower glass shelf | |
| Metal frame coating performance | GB/T 19001Quality management systems requirements, applicable for consistent powder coat adhesion and corrosion resistance of steel frame components | |
| Formaldehyde emission limits | GB 18584Indoor decorating and refurbishing materials - Limit of formaldehyde emission of wood-based furniture and finishing materials, applicable for any auxiliary wooden or adhesive components |
This product must meet the following technical requirements: 1. Tabletop safety performance: GB/T 3324General technical requirements for wooden furniture, applicable for dimensional stability, surface finish and edge safety requirements for household tables; 2. Tempered glass safety: GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for impact resistance and fragmentation requirements for the lower glass shelf; 3. Metal frame coating performance: GB/T 19001Quality management systems requirements, applicable for consistent powder coat adhesion and corrosion resistance of steel frame components; 4. Formaldehyde emission limits: GB 18584Indoor decorating and refurbishing materials - Limit of formaldehyde emission of wood-based furniture and finishing materials, applicable for any auxiliary wooden or adhesive components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
