| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 750 x 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Lower storage platform height from floor | 120 mm | |
| Drawer internal dimensions | 500 x 400 x 150 mm | |
| Metal frame wall thickness | 2 mm | |
| Spherical support foot diameter | 80 mm | |
| Table edge radius | 30 mm | |
| Open frame vertical clearance under top | 200 mm | |
| Lower storage unit overall dimensions | 900 x 550 x 220 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 50 kg | |
|---|---|---|
| Drawer static load capacity | 10 kg | |
| Product net weight | 45 kg | |
| Top surface scratch resistance | 3000 cycles | |
| Recommended maximum placeable item height | 350 mm | |
| Stability tilt load on edge | 20 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm glossy sintered stone/laminate panel, polished sealed finish | |
|---|---|---|
| Frame trim | Dark bronze polished stainless steel, mirror polished edge | |
| Lower storage body | Warm taupe high-gloss lacquered MDF, sealed scratch-resistant coating | |
| Drawer front panel | High-gloss lacquered MDF, matching taupe finish, flush fit | |
| Spherical support foot | Polished dark chrome-plated solid metal, floor contact pad | |
| Base bottom trim | Dark bronze metal skid ring, anti-scratch felt lining | |
| Drawer interior | E1 grade engineered wood, smooth matte finish | |
| Drawer slides | Cold-rolled steel silent full-extension slides, zinc plated | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Single flush-mounted drawer with soft-close slides, 300mm extension length | |
|---|---|---|
| Lower open shelf access | Curved open metal frame allows 3-sided access to shelf | |
| Tabletop surface use | Smooth non-porous sealed surface, stain and water resistant | |
| Floor protection | Felt pads on all base contact points prevent floor scratching | |
| Structural support | Cantilevered metal frame with central spherical foot distributes weight evenly | |
| Edge safety | Fully rounded perimeter edges eliminate sharp corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of 3-seat upholstered sofas for beverage, book and decor display | |
|---|---|---|
| Lounge and reception areas | Used in high-end residential lounges or boutique office waiting areas | |
| Small apartment configurations | Sized for 25sqm living rooms without excessive floor space occupation | |
| Matched set installation | Paired with coordinating round side table for cohesive living room layout | |
| Low-pile carpet or hard flooring | Suitable for placement on carpet, tile or wood flooring with integrated floor protection |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable for performance validation | |
|---|---|---|
| EN 13722:2004 | Furniture surface finish resistance to cold liquids, applicable for tabletop testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to lacquered storage components | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to engineered wood substrate | |
| GB 6675-2014 | Furniture safety code for sharp edges, applicable to household use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to lacquered storage components; 2. GB/T 4897.3-2003: Particleboard for furniture use, applicable to engineered wood substrate; 3. GB 6675-2014: Furniture safety code for sharp edges, applicable to household use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
