| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (large table centered, small table pulled out) | 900 x 900 x 550 mm | |
|---|---|---|
| Large table dimensions | φ800 x 460 mm | |
| Large tabletop thickness | 12 mm | |
| Large table drum base diameter | 780 mm | |
| Large table bottom plinth height | 50 mm | |
| Small table dimensions | φ610 x 550 mm | |
| Small table pedestal base diameter (bottom) | 320 mm | |
| Tabletop edge radius | 10 mm | |
| Floor clearance under large drum base | 10 mm | |
| Nesting overlap clearance | 120 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table static distributed load capacity | 100 kg | |
|---|---|---|
| Sintered stone top surface heat resistance | 1200 °C | |
| Sintered stone top abrasion resistance | 6 Mohs | |
| Set total net weight | 60 kg | |
| Stability tilt threshold | 15 degrees | |
| Tabletop stain resistance rating | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large and small table tops | 12mm polished sintered stone with white marble-pattern veining | |
|---|---|---|
| Large table drum body | Beige faux leather (saddle leather) wrapped over MDF inner frame | |
| Large table bottom plinth | Black matte carbon steel circular ring base | |
| Small table support pedestal | Gunmetal brushed carbon steel tapered conical column | |
| Tabletop edge trim | 10mm wide black powder-coated metal band | |
| Base floor contact pads | 8mm thick silicone anti-slip pads | |
| Inner drum base core | 15mm thick E1-grade MDF structural frame | |
| Metal surface finish | Baked matte powder coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting space-saving design | Small table slides partially under large table to reduce footprint to 900mm diameter | |
|---|---|---|
| Independent dual-table use | Both tables can be separated for use as standalone coffee table and side end table | |
| Non-marring floor protection | Silicone contact pads prevent scuffs on hardwood, tile, and low-pile rug surfaces | |
| Easy-clean tabletop surface | Non-porous sintered stone wipes clean with damp cloth, no sealing required | |
| Fixed-height stable construction | No adjustable components, fully welded and assembled frames eliminate wobble | |
| Rounded edge safety design | All tabletop and base edges are fully rounded to reduce impact injury risk | |
| Heat-resistant serving surface | Tabletop supports direct placement of hot mugs, teapots, and warm serving dishes | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room central placement | Positioned directly in front of 3-seat sofas for drink, decor, and remote storage | |
|---|---|---|
| Modern light luxury and minimalist interiors | Matches neutral-toned upholstery, metal accents, and stone finishes in contemporary homes | |
| Compact apartment and open-plan lounge use | Nesting function saves floor space in small living areas when extra surface is not needed | |
| Lounge and reception waiting areas | Suitable for boutique office lounges, residential lobbies, and design studio reception spaces | |
| Coordinated sofa and area rug pairing | Designed for placement on low-pile woven area rugs paired with modular or sectional sofas |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability, and safety requirements for domestic living room tables | |
|---|---|---|
| EN 13722:2004 | Furniture test methods for table stability under vertical and horizontal loads | |
| EN 71-3:2019 | Migration of certain elements, applicable for surface finish safety in residential use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to drum base structural components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard/MDF requirements for dry-condition use, applicable to inner base frame | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, E1 grade required for inner substrates | |
| GB/T 17657-2013 | Test methods for surface physical/chemical properties of wood-based furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to drum base structural components; 2. GB/T 4897.3-2015: Particleboard/MDF requirements for dry-condition use, applicable to inner base frame; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, E1 grade required for inner substrates; 4. GB/T 17657-2013: Test methods for surface physical/chemical properties of wood-based furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
