| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall dimensions | 800 x 800 x 380 mm | |
|---|---|---|
| Small table overall dimensions | 650 x 650 x 450 mm | |
| Tabletop thickness | 20 mm | |
| Pedestal base section size | 180 x 120 mm | |
| Pedestal base height for large table | 360 mm | |
| Pedestal base height for small table | 430 mm | |
| Tabletop corner radius | 80 mm | |
| Floor clearance under large tabletop | 360 mm | |
| Metal wall thickness for pedestal bases | 2 mm | |
| Decorative metal corner accent size | 120 x 80 mm | |
| Nesting overlap depth when stored | 350 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table distributed static load capacity | 100 kg | |
|---|---|---|
| Large table individual net weight | 42 kg | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Tabletop heat resistance rating | 120 °C | |
| Floor protection load per foot pad | 80 kg per pedestal | |
| Recommended maximum number of users served | 6 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large white tabletop | Engineered stone composite with polished white marble grey-vein finish | |
|---|---|---|
| Small black tabletop | Engineered stone composite with polished black marble white-vein finish | |
| Pedestal base construction | Powder-coated gunmetal gray cold-rolled steel rectangular block | |
| Corner decorative accents | Brushed gunmetal metal inlay pads at each table corner | |
| Table edge finishing | Soft eased and polished rounded edge profile | |
| Floor contact pads | Non-slip non-marking rubber pads fixed to base bottom | |
| Tabletop substrate core | High-density MDF or fiber cement backing under stone veneer | |
| Assembly hardware | Zinc-plated steel connecting bolts with hex key tightening | |
| Metal base surface treatment | Epoxy powder coating with 60um dry film thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Nested space-saving configuration | Smaller taller table slides partially under the larger lower table to reduce footprint when not in extended use | |
|---|---|---|
| Dual-height surface use | Two distinct surface heights accommodate separate serving, decor, and reading zones | |
| Leveling adjustment | Fixed rubber foot pads compensate for minor floor unevenness up to 2mm | |
| Easy-clean non-porous surface | Polished sealed tabletop wipes clean with damp cloth for daily spills | |
| Knock-down assembly | Pedestal bases attach to tabletops via included hardware for flat-packed shipping | |
| Scratch-resistant tabletop | Sealed hard surface resists scuffs from trays, books, and decor items | |
| No integrated storage | Solid pedestal bases and flat tabletop provide no enclosed drawers or shelves | |
| Flexible arrangement | Tables can be positioned side-by-side, offset, or fully nested to suit room layout | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Contemporary open-plan living rooms | Low-profile design centers a sectional sofa without blocking sightlines | |
|---|---|---|
| Small urban apartments and condos | Nested configuration reduces footprint when extra surface area is not needed | |
| Modern office lounge and reception areas | Durable polished tops support drinks, reading materials, and decorative displays | |
| Residential media rooms | Low height does not block views of wall-mounted televisions from seating positions | |
| Designer showrooms and model homes | High-contrast black and white marble finish showcases modern minimalist luxury styling | |
| Households with soft-surface flooring | Wide block bases distribute weight to prevent indentation on area rugs and carpet |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, tables: safety, strength and durability requirements for residential tables | |
|---|---|---|
| EN 15185:2011 | Furniture: test for assessment of surface resistance to abrasion for tabletop finishes | |
| EN 15186:2011 | Furniture: test for assessment of surface resistance to scratching for polished tabletops | |
| EN 13722:2004 | Furniture: test methods for strength and durability of table bases and leg attachments |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for tabletop substrate dimensional stability and edge quality | |
|---|---|---|
| GB/T 4893.1-2021 | Furniture surface cold liquid resistance test, applicable for tabletop stain resistance verification | |
| GB/T 4893.2-2020 | Furniture surface wet heat resistance test, applicable for hot drink serving surface performance | |
| GB/T 4893.4-2013 | Furniture surface abrasion resistance test, applicable for long-term tabletop wear validation | |
| GB/T 4893.9-2013 | Furniture surface impact resistance test, applicable to prevent chipping from dropped items |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for tabletop substrate dimensional stability and edge quality; 2. GB/T 4893.1-2021: Furniture surface cold liquid resistance test, applicable for tabletop stain resistance verification; 3. GB/T 4893.2-2020: Furniture surface wet heat resistance test, applicable for hot drink serving surface performance; 4. GB/T 4893.4-2013: Furniture surface abrasion resistance test, applicable for long-term tabletop wear validation; 5. GB/T 4893.9-2013: Furniture surface impact resistance test, applicable to prevent chipping from dropped items; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
