| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1100 x 700 x 450 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Under-table floor clearance | 30 mm | |
| Single curved base panel width | 300 mm | |
| Single curved base panel depth | 150 mm | |
| Base panel wall thickness | 25 mm | |
| Edge radius on tabletop long ends | 180 mm | |
| Base offset from table ends | 100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static top load capacity | 90 kg | |
|---|---|---|
| Product net weight | 60 kg | |
| Glossy surface abrasion resistance | 2000 cycles | |
| Surface spill resistance rating | Level 4 | |
| Recommended maximum single point load | 20 kg | |
| Recommended user count for use | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm MDF core with white marble-effect glossy melamine overlay | |
|---|---|---|
| Tabletop finish coating | High-gloss UV-cured clear protective lacquer | |
| Support base panels | Matte black powder-coated 25mm thick steel plate | |
| Base anti-slip pads | 3mm thick EVA rubber pads affixed to base bottom | |
| Top-to-base connectors | M8 zinc-plated steel hex bolts with lock washers | |
| Surface veining pattern | Faux white Carrara marble gray veining under clear coat | |
| Base finish texture | Low-glare matte black powder coat, 80 micron thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop placement function | Flat stable surface for holding drinks, books, and decorative items at sofa-seat height | |
|---|---|---|
| Assembly structure | Knockdown design requiring attachment of two base panels to tabletop underside | |
| Floor protection feature | Soft rubber anti-slip pads under each base prevent scratches on hard flooring and rugs | |
| Edge safety design | Fully rounded soft organic edges eliminate sharp corner hazards for households with children or pets | |
| Surface maintenance | Non-porous glossy sealed surface allows wipe-clean care for everyday spills and dust | |
| Stability design | Dual offset wide curved panels provide tip resistance for uneven weight placement across the top | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Positioned in front of 3seat sofas for drink, book and decor placement | |
|---|---|---|
| Apartment and small space settings | Compact low-profile form fits small open-plan living areas without visual clutter | |
| Modern minimalist interior schemes | Two-tone white and black organic silhouette complements contemporary neutral decor | |
| Light commercial lounge use | Suitable for boutique hotel lobbies, office breakout areas and waiting rooms | |
| Rug and hard floor compatibility | Low floor clearance and anti-slip pads work on low-pile rugs, tile and hardwood floors |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic residential tables | |
|---|---|---|
| EN 13722:2004 | Furniture performance test methods for occasional domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to wooden residential occasional furniture | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit for formaldehyde emission from wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to wooden residential occasional furniture; 2. GB 18584-2001: Indoor decoration material limit for formaldehyde emission from wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
