| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1250 x 681 x 401 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 28.5 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 50 kg | |
| Surface heat resistance | 120 °C | |
| Surface scratch resistance (Mohs hardness) | 6 | |
| Metal finish coating abrasion resistance | 500 cycles | |
| Recommended maximum place setting capacity | 4 users | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | White polished sintered stone with subtle grey marble veining | |
|---|---|---|
| Base square bottom plate | 1.5mm thick 304 stainless steel with polished gold PVD finish | |
| Central vertical support column | 2mm thick polished gold stainless steel tubular column | |
| Curved looped base frame | 12mm diameter polished gold stainless steel rod forming open loop | |
| Decorative sphere accent | Solid polished gold-finished stainless steel sphere | |
| Tabletop backing | 12mm thick high-density MDF reinforcement layer | |
| Surface finish | High-gloss polished coating on stone and metal components | |
| Foot pads | Non-slip rubber floor protection pads under base plate | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structure type | Single-tier fixed open coffee table with no moving parts | |
|---|---|---|
| Surface function | Non-porous stain-resistant top for beverage, decor, and book placement | |
| Floor protection | Discreet rubber foot pads prevent hard metal contact with flooring | |
| Stability design | Low center of gravity from weighted metal base prevents tipping | |
| Cleaning compatibility | Compatible with mild household cleaners for stone and polished metal | |
| Assembly requirement | Knockdown assembly requiring attachment of top to base with included hardware | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary placement | Centered in front of residential living room sectional sofas | |
|---|---|---|
| Recommended setting | Modern luxury, contemporary, and minimalist interior design schemes | |
| Suitable users | Residential homeowners, boutique lounge spaces, and high-end apartment staging | |
| Secondary use case | Lobby reception seating area accent table | |
| Pairing recommendation | Coordinate with matching marble-top side tables and neutral upholstered seating | |
| Surface usage note | Supports display of decor, books, trays, and beverage service items |
EU Market Access Requirements* EN Standards
| EN 15372:2008+A1:2016 | Safety, strength, and durability requirements for domestic furniture tables | |
|---|---|---|
| EN 13722:2004 | Performance requirements for furniture surfaces including scratch and stain resistance | |
| EN 10088-2:2014 | Stainless steel material specification for decorative and structural furniture components |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for hidden MDF backing components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard/MDF requirements for furniture structural backing panels | |
| GB 6566-2010 | Radionuclide limits for decorative stone building/ furniture materials | |
| GB/T 19001-2016 | Quality management system guideline for furniture production consistency |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for hidden MDF backing components; 2. GB/T 4897.3-2015: Particleboard/MDF requirements for furniture structural backing panels; 3. GB 6566-2010: Radionuclide limits for decorative stone building/ furniture materials; 4. GB/T 19001-2016: Quality management system guideline for furniture production consistency; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
