| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Larger table overall dimensions | 900 mm diameter × 450 mm total height | |
|---|---|---|
| Smaller table overall dimensions | 600 mm diameter × 550 mm total height | |
| Tabletop raised lip height | 20 mm | |
| Upper pedestal wall thickness | 8 mm | |
| Larger table marble plinth dimensions | 380 mm diameter × 80 mm height | |
| Smaller table marble plinth dimensions | 280 mm diameter × 100 mm height | |
| Tabletop material thickness | 25 mm | |
| Nested set total footprint when tucked | 900 mm × 600 mm | |
| Floor clearance under tabletop lip | 420 mm for larger unit, 520 mm for smaller unit | |
| Pedestal upper section taper diameter | 280 mm at narrowest point for larger unit | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Per-table static distributed load capacity | 50 kg | |
|---|---|---|
| Marble surface water resistance rating | Waterproof, wipe-clean with soft cloth | |
| Matte powder coat finish abrasion resistance | 1000 rub cycles without chipping | |
| Marble plinth static stability load factor | 3x rated tabletop load | |
| Nesting clear gap when fully tucked | 20 mm between unit bases | |
| Per-unit product weight | 35 kg for larger unit, 25 kg for smaller unit | |
| Warranty period for frame defects | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop tray surface | Matte black coated engineered composite with 20mm raised lip | |
|---|---|---|
| Upper tapered pedestal | Matte black powder-coated carbon steel, monolithic flared form | |
| Lower base plinth | Natural black marble with white veining, polished sealed finish | |
| Floor protection pads | 3mm thick non-slip felt pads affixed to plinth bottom | |
| Joint connection between pedestal and plinth | M8 steel threaded inserts with epoxy bonding | |
| Tabletop lip finish | Smooth satin matte black, same coating as pedestal body | |
| Marble sealer coating thickness | 0.2 mm polyurethane sealer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting design capability | Smaller table tucks fully under larger unit to save floor space | |
|---|---|---|
| Separate placement flexibility | Two units can be positioned independently as side or accent tables | |
| Tray edge containment | Raised tabletop lip prevents small decor items from sliding off | |
| No assembly requirement | Units ship fully assembled, ready for immediate placement | |
| Surface maintenance | Wipe spills immediately with soft damp cloth, avoid abrasive cleaners | |
| Floor protection function | Felt base pads prevent scratching of hard tile or wood flooring | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Contemporary living room placement | Position in front of sofas for drinks, decor, and reading materials | |
|---|---|---|
| Wabi-sabi or minimalist interior schemes | Sculptural matte black form complements monochrome neutral palettes | |
| Small apartment or open studio use | Nesting function saves floor space when not in use | |
| High-end residential lounge areas | Marble detail adds premium accent for upscale interior designs | |
| Commercial lounge or reception waiting areas | Durable stone and metal finish withstands light commercial traffic |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety strength and durability requirements for domestic tables, applicable for load testing | |
|---|---|---|
| EN 15372:2008 | Furniture durability and safety for residential surfaces, applicable for finish performance | |
| EN 13722:2004 | Furniture test for table stability, applicable for pedestal base tip resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for finish and stability checks | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials, applicable for natural marble plinth components | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, applicable for matte coated tabletops |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for finish and stability checks; 2. GB 6566-2010: Limit of radionuclides in building materials, applicable for natural marble plinth components; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, applicable for matte coated tabletops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
