Product supplierModern Round High-Gloss Coffee Table with Frosted Glass Top and Recessed Side Storage Niches, High-gloss UV-coated MDF engineered wood
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 915 × 915 × 485 mm | |
|---|---|---|
| Frosted glass inset diameter | 660 mm | |
| Black trim ring width | 76 mm | |
| Recessed side niche opening width | 350 mm | |
| Recessed side niche internal depth | 180 mm | |
| Recessed side niche internal height | 280 mm | |
| Table top thickness | 42 mm | |
| Floor clearance at niche lower edge | 15 mm | |
| Glass top thickness | 8 mm | |
| Outer shell wall thickness | 18 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed static top load capacity | 100 kg | |
|---|---|---|
| Total product net weight | 29 kg | |
| Recommended maximum placeable object height on top | 350 mm | |
| Anti-slip floor protection pad diameter | 30 mm | |
| Warranty period | 3 years | |
| Finish abrasion resistance rating | 2000 cycles | |
| Available finish color options | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer drum shell | High-gloss UV-coated MDF engineered wood | |
|---|---|---|
| Table top inset | 8mm frosted tempered safety glass | |
| Glass trim ring | High-gloss black painted MDF | |
| Storage niche interiors | Matte white sealed engineered wood | |
| Floor contact feet | Non-slip PVC rubber pads | |
| Assembly connectors | Zinc-plated steel cam lock screws | |
| Surface finish topcoat | UV-cured high-gloss lacquer | |
| Edge treatment | Rounded smooth polished edges with no sharp corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Open integrated storage | 4 recessed concave side niches for magazines, remotes and small decor | |
|---|---|---|
| Decorative display surface | Central frosted glass top suitable for vases, plants and tabletop decor | |
| Stationary fixed design | No lift, tilt or moving mechanisms, stable low-profile placement | |
| Floor protection function | Non-slip rubber feet prevent scratches on hard flooring and reduce wobble | |
| Easy-clean surface | Smooth high-gloss and glass surfaces wipe clean with soft dry cloth | |
| Knock-down assembly | Flat-pack assembly required with included hardware, single person build possible | |
| Edge safety design | All exposed edges are fully rounded to eliminate sharp impact points | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room center placement | Positioned in front of sofas for drinks, decor and media accessory storage | |
|---|---|---|
| Modern minimalist interiors | Suits contemporary, space-age and high-gloss decor schemes | |
| Small apartment use | Compact round footprint works in limited living space without sharp corners | |
| Lounge and reception areas | Suitable for casual office waiting areas and boutique lounge spaces | |
| Low-traffic residential use | Designed for domestic indoor use, not for heavy commercial high-traffic applications | |
| Decor focal point placement | Acts as a statement center table with contrasting black and white finish |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 14073-2:2004 | Office and domestic storage furniture safety requirements | |
| EN 12150-1:2015 | Tempered soda lime silicate glass safety specification |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood base shell | |
|---|---|---|
| GB 15763.2-2005 | Safety requirements for tempered glass used in furniture table tops | |
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture finishes |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood base shell; 2. GB 15763.2-2005: Safety requirements for tempered glass used in furniture table tops; 3. GB/T 4893.4-2013: Surface wear resistance test method for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool