| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 863 x 863 x 457 mm | |
|---|---|---|
| Large table diameter | 863 mm | |
| Large table total height | 457 mm | |
| Large table top thickness | 50 mm | |
| Small table diameter | 635 mm | |
| Small table total height | 406 mm | |
| Tabletop edge vertical striped inlay width | 30 mm | |
| Under-table floor clearance | 380 mm | |
| Nested footprint (small table tucked) | 863 x 680 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 26 kg | |
|---|---|---|
| Large table distributed top load capacity | 50 kg | |
| Surface coating abrasion resistance | 2000 cycles | |
| Finish moisture resistance | Grade B for indoor dry use | |
| Structural joint static load rating | 100 kg | |
| Warranty period (structural defects) | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core substrate | 18mm thick MDF panel | |
|---|---|---|
| Tabletop surface layer | Natural burl wood veneer with multi-color wood inlay | |
| Tabletop edge construction | Alternating solid black and off-white wood veneer strips | |
| Surface finish | Low-VOC matte clear lacquer | |
| Support legs | Solid rubberwood block legs with matte black paint | |
| Joinery hardware | Zinc-plated steel corner brackets with M6 connector bolts | |
| Surface protective layer | 2mm thick scratch-resistant top coat | |
| Edge inlay adhesive | Water-resistant PVA wood glue | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Two-piece nesting function | Small table slides partially under large table | |
|---|---|---|
| Dual-height surface use | Large and small tables have 51mm height difference | |
| Stable three-leg support | Each table uses three evenly spaced block legs | |
| Surface care compatibility | Clean with soft damp cloth, no harsh solvents | |
| Floor protection | Leg bases fitted with 5mm thick felt floor glides | |
| Assembly requirement | Delivered fully assembled | |
| Customization option | Dimensions adjustable per buyer request | |
| Leg cross-section (per block leg) | 120 x 120 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Position in front of 3-seater or sectional sofas as primary coffee surface | |
|---|---|---|
| Boutique lounge and waiting area use | Suits high-end retail lounges, design studios and hotel reception areas | |
| Tiered display and serving | Use two surface heights for serving drinks, displaying decor and books | |
| Small urban apartment fit | Nested configuration saves floor space in compact living areas | |
| Postmodern/Mid-century modern interior matching | Pairs with curved upholstered sofas, textured rugs and neutral toned seating | |
| Low-traffic formal reception spaces | Suitable for quiet office reception or executive lounge areas |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Residential furniture strength, durability and safety requirements for tables | |
|---|---|---|
| EN 13722:2004 | Furniture test methods for surface resistance to cold liquids | |
| EN 71-3:2019+A1:2021 | Migration of certain elements, for safety in homes with children |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, for indoor air quality compliance | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, validates finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety; 2. GB 18584-2001: Limit of harmful substances in wood furniture, for indoor air quality compliance; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, validates finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
