| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1250 x 711 x 460 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Plinth base length | 1000 mm | |
| Plinth base width | 450 mm | |
| Plinth base height | 120 mm | |
| Tabletop edge radius | 80 mm | |
| Floor clearance under tabletop | 310 mm | |
| Center metal accent diameter | 100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 60 kg | |
|---|---|---|
| Product net weight | 45 kg | |
| Finish scratch resistance rating | 3000 cycles | |
| Tabletop heat resistance | 120 °C | |
| Recommended number of users | 4 | |
| Base static floor load rating | 100 kg | |
| Manufacturing defect warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate and finish | 12mm sintered stone slab with 18mm engineered wood backing, matte light cream finish | |
|---|---|---|
| Plinth base construction | High-density MDF core with matte cream PU paint finish, sealed rounded edges | |
| Center connecting accent | Polished chrome-plated zinc alloy spherical joint | |
| Base bottom protection | 5mm thick non-marking EVA felt pads applied to all plinth contact points | |
| Assembly hardware | Zinc-plated steel M8 connector bolts with locking washers | |
| Surface coating thickness | 0.15mm matte PU topcoat on base components | |
| Tabletop edge treatment | Hand-polished rounded bullnose edge, no sharp corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Fixed height design | Permanent 460mm lounge-optimized height with no lift or height-adjustment mechanism | |
|---|---|---|
| Central support structure | Single centered spherical accent transfers tabletop load evenly across the oval plinth base | |
| Stain-resistant tabletop | Non-porous sintered stone surface resists liquid absorption from common household spills | |
| Floor protection | Felt base pads prevent scuffing and scratching on hard flooring and low-pile rugs | |
| Knockdown assembly | Two-person assembly required, with tabletop attaching to pre-assembled plinth base via included hardware | |
| Stable base design | Wide low oval plinth eliminates tip risk from up to 15kg offset loads on table edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned centered in front of 3-seat upholstered sofas for casual entertaining | |
|---|---|---|
| Contemporary interior styles | Suits minimalist, modern cream, wabi-sabi and light luxury residential interiors | |
| Low-traffic lounge spaces | Appropriate for apartments, open-plan living areas and boutique lounge zones | |
| Serving and display use | Supports decorative arrangements, tray service, books and small tabletop accessories | |
| Hard floor and rug placement | Safe for use on wood, tile, polished concrete and low-pile woven area rugs | |
| Small to medium living spaces | Fits rooms sized 25sqm without dominating the floor plan |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining/lounge tables | |
|---|---|---|
| EN 15372:2008+A1:2010 | Furniture surface resistance to cold liquids, applicable to tabletop finish | |
| EN 71-3:2019+A1:2021 | Migration of certain elements, applicable to household furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base paint and construction quality | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard/MDF requirements for furniture use, applicable to plinth substrate | |
| GB 18584-2001 | Indoor decoration material formaldehyde emission limits for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base paint and construction quality; 2. GB/T 4897.3-2015: Particleboard/MDF requirements for furniture use, applicable to plinth substrate; 3. GB 18584-2001: Indoor decoration material formaldehyde emission limits for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
