| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 500 x 500 x 600 mm | |
|---|---|---|
| tabletop thickness | 18 mm | |
| metal frame tube wall thickness | 1.2 mm | |
| frame tube profile width | 25 mm | |
| lower bracing height from floor | 60 mm | |
| open frame vertical clear opening per side | 450 mm | |
| floor contact pad diameter | 20 mm | |
| tabletop overhang beyond frame | 10 mm | |
| base footprint | 480 x 480 mm | |
| corner radius of tabletop | 2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| net product weight | 8 kg | |
|---|---|---|
| static tabletop load capacity | 30 kg | |
| frame static load rating | 80 kg | |
| tabletop surface abrasion resistance | 2000 cycles | |
| wobble deflection under 20kg center load | 2 mm | |
| surface water resistance rating | IPX2 | |
| applicable placement count per standard 20ft container | 850 units | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop substrate | High-density MDF core | |
|---|---|---|
| tabletop finish | White grey-veined matte marble-look laminate | |
| frame material | Cold-rolled steel square tube | |
| frame finish | Matte black electrostatic powder coating | |
| assembly hardware | Zinc-plated steel allen bolts and lock washers | |
| floor contact pads | Non-marking TPE rubber pads | |
| tabletop edge treatment | Sealed eased edge to prevent moisture ingress | |
| frame joint construction | Mitered corner welds covered with touch-up paint | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| assembly requirement | Knock-down flat-pack assembly with included allen key | |
|---|---|---|
| surface function | Flat stable surface for drinks, lamps, decor or small personal items | |
| floor protection | Bottom rubber pads prevent scratching hard flooring and reduce slip | |
| open frame design | No lower shelf or enclosure for unobstructed lightweight visual profile | |
| cleaning compatibility | Smooth sealed surfaces support wipe-clean with mild household cleaners | |
| placement adaptability | Symmetrical square form works next to sofas, beds, or as corner accent stands | |
| hardware adjustment | Visible frame bolt holes allow re-tightening to eliminate wobble after assembly | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| residential living room | Position next to sofas or armchairs to hold drinks, remote controls and table lamps | |
|---|---|---|
| residential bedroom | Use as bedside table for alarm clocks, phones and small nighttime essentials | |
| commercial lounge space | Deploy in office breakouts, hotel lobbies or waiting areas for guest beverage placement | |
| small accent display use | Hold potted plants, framed photos or decorative objects in entryways or hallways | |
| temporary work surface extension | Place adjacent to work desks to hold peripherals, notebooks or small office supplies |
EU Market Access Requirements* EN Standards
| surface scratch resistance | EN 15185:2011 Level 3 | |
|---|---|---|
| furniture mechanical safety | EN 12521:2015 |
Standards applicable to China-market projects
| tabletop formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| metal frame coating adhesion | GB/T 9286Grade 1 | |
| furniture stability | GB/T 10357.2 |
This product must meet the following technical requirements: 1. tabletop formaldehyde emission: GB/T 18580E1 grade; 2. metal frame coating adhesion: GB/T 9286Grade 1; 3. furniture stability: GB/T 10357.2; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
